![[Contents]](../images/toc_d.gif)
![[Index]](../images/index_d.gif)
![[Help]](../images/help_d.gif)
![[Retrace]](../images/retrace_d.gif)
![[Browse <]](../images/prev.gif)
![[Browse >]](../images/next.gif)
TABLE OF CONTENTS
graphics.library/AddAnimOb
graphics.library/AddBob
graphics.library/AddFont
graphics.library/AddVSprite
graphics.library/AllocRaster
graphics.library/AndRectRegion
graphics.library/AndRegionRegion
graphics.library/Animate
graphics.library/AreaCircle
graphics.library/AreaDraw
graphics.library/AreaEllipse
graphics.library/AreaEnd
graphics.library/AreaMove
graphics.library/AskFont
graphics.library/AskSoftStyle
graphics.library/AttemptLockLayerRom
graphics.library/BitMapScale
graphics.library/BltBitMap
graphics.library/BltBitMapRastPort
graphics.library/BltClear
graphics.library/BltMaskBitMapRastPort
graphics.library/BltPattern
graphics.library/BltTemplate
graphics.library/CBump
graphics.library/CEND
graphics.library/ChangeSprite
graphics.library/CINIT
graphics.library/ClearEOL
graphics.library/ClearRectRegion
graphics.library/ClearRegion
graphics.library/ClearScreen
graphics.library/ClipBlit
graphics.library/CloseFont
graphics.library/CloseMonitor
graphics.library/CMOVE
graphics.library/CopySBitMap
graphics.library/CWAIT
graphics.library/DisownBlitter
graphics.library/DisposeRegion
graphics.library/DoCollision
graphics.library/Draw
graphics.library/DrawEllipse
graphics.library/DrawGList
graphics.library/EraseRect
graphics.library/ExtendFont
graphics.library/FindDisplayInfo
graphics.library/Flood
graphics.library/FontExtent
graphics.library/FreeColorMap
graphics.library/FreeCopList
graphics.library/FreeCprList
graphics.library/FreeGBuffers
graphics.library/FreeRaster
graphics.library/FreeSprite
graphics.library/FreeVPortCopLists
graphics.library/GetColorMap
graphics.library/GetDisplayInfoData
graphics.library/GetGBuffers
graphics.library/GetRGB4
graphics.library/GetSprite
graphics.library/GetVPModeID
graphics.library/GfxAssociate
graphics.library/GfxFree
graphics.library/GfxLookUP
graphics.library/GfxNew
graphics.library/InitArea
graphics.library/InitBitMap
graphics.library/InitGels
graphics.library/InitGMasks
graphics.library/InitMasks
graphics.library/InitRastPort
graphics.library/InitTmpRas
graphics.library/InitView
graphics.library/InitVPort
graphics.library/LoadRGB4
graphics.library/LoadView
graphics.library/LockLayerRom
graphics.library/MakeVPort
graphics.library/ModeNotAvailable
graphics.library/Move
graphics.library/MoveSprite
graphics.library/MrgCop
graphics.library/NewRegion
graphics.library/NextDisplayInfo
graphics.library/OpenFont
graphics.library/OpenMonitor
graphics.library/OrRectRegion
graphics.library/OrRegionRegion
graphics.library/OwnBlitter
graphics.library/PolyDraw
graphics.library/QBlit
graphics.library/QBSBlit
graphics.library/ReadPixel
graphics.library/ReadPixelArray8
graphics.library/ReadPixelLine8
graphics.library/RectFill
graphics.library/RemBob
graphics.library/RemFont
graphics.library/RemIBob
graphics.library/RemVSprite
graphics.library/ScalerDiv
graphics.library/ScrollRaster
graphics.library/ScrollVPort
graphics.library/SetAPen
graphics.library/SetBPen
graphics.library/SetCollision
graphics.library/SetDrMd
graphics.library/SetFont
graphics.library/SetOPen
graphics.library/SetRast
graphics.library/SetRGB4
graphics.library/SetRGB4CM
graphics.library/SetSoftStyle
graphics.library/SortGList
graphics.library/StripFont
graphics.library/SyncSBitMap
graphics.library/Text
graphics.library/TextExtent
graphics.library/TextFit
graphics.library/TextLength
graphics.library/UnlockLayerRom
graphics.library/VBeamPos
graphics.library/VideoControl
graphics.library/WaitBlit
graphics.library/WaitBOVP
graphics.library/WaitTOF
graphics.library/WeighTAMatch
graphics.library/WritePixel
graphics.library/WritePixelArray8
graphics.library/WritePixelLine8
graphics.library/XorRectRegion
graphics.library/XorRegionRegion
graphics.library/AddAnimOb graphics.library/AddAnimOb
NAME
AddAnimOb -- Add an AnimOb to the linked list of AnimObs.
SYNOPSIS
AddAnimOb(anOb, anKey, rp)
A0 A1 A2
void AddAnimOb(struct AnimOb *,struct AnimOb **, struct RastPort *);
FUNCTION
Links this AnimOb into the current list pointed to by animKey.
Initializes all the Timers of the AnimOb's components.
Calls AddBob with each component's Bob.
rp->GelsInfo must point to an initialized GelsInfo structure.
INPUTS
anOb = pointer to the AnimOb structure to be added to the list
anKey = address of a pointer to the first AnimOb in the list
(anKey = NULL if there are no AnimObs in the list so far)
rp = pointer to a valid RastPort
RESULT
BUGS
SEE ALSO
Animate() graphics/rastport.h graphics/gels.h
graphics.library/AddBob graphics.library/AddBob
NAME
AddBob -- Adds a Bob to current gel list.
SYNOPSIS
AddBob(Bob, rp)
A0 A1
void AddBob(struct Bob *, struct RastPort *);
FUNCTION
Sets up the system Bob flags, then links this gel into the list
via AddVSprite.
INPUTS
Bob = pointer to the Bob structure to be added to the gel list
rp = pointer to a RastPort structure
RESULT
BUGS
SEE ALSO
InitGels() AddVSprite() graphics/gels.h graphics/rastport.h
graphics.library/AddFont graphics.library/AddFont
NAME
AddFont -- add a font to the system list
SYNOPSIS
AddFont(textFont)
A1
void AddFont(struct TextFont *);
FUNCTION
This function adds the text font to the system, making it
available for use by any application. The font added must be
in public memory, and remain until successfully removed.
INPUTS
textFont - a TextFont structure in public ram.
RESULT
BUGS
SEE ALSO
SetFont() RemFont() graphics/text.h
graphics.library/AddVSprite graphics.library/AddVSprite
NAME
AddVSprite -- Add a VSprite to the current gel list.
SYNOPSIS
AddVSprite(vs, rp)
A0 A1
void AddVSprite(struct VSprite *, struct RastPort *);
FUNCTION
Sets up the system VSprite flags
Links this VSprite into the current gel list using its Y,X
INPUTS
vs = pointer to the VSprite structure to be added to the gel list
rp = pointer to a RastPort structure
RESULT
BUGS
SEE ALSO
InitGels() graphics/rastport.h graphics/gels.h
graphics.library/AllocRaster graphics.library/AllocRaster
NAME
AllocRaster -- Allocate space for a bitplane.
SYNOPSIS
planeptr = AllocRaster( width, height )
d0 d0:16 d1:16
PLANEPTR AllocRaster(UWORD,UWORD);
FUNCTION
This function calls the memory allocation routines
to allocate memory space for a bitplane width bits
wide and height bits high.
INPUTS
width - number of bits wide for bitplane
height - number of rows in bitplane
RESULT
planeptr - pointer to first word in bitplane, or NULL if
it was not possible to allocate the desired
amount of memory.
BUGS
SEE ALSO
FreeRaster() graphics/gfx.h
graphics.library/AndRectRegion graphics.library/AndRectRegion
NAME
AndRectRegion -- Perform 2d AND operation of rectangle
with region, leaving result in region.
SYNOPSIS
AndRectRegion(region,rectangle)
a0 a1
void AndRectRegion( struct Region *, struct Rectangle * );
FUNCTION
Clip away any portion of the region that exists outside
of the rectangle. Leave the result in region.
INPUTS
region - pointer to Region structure
rectangle - pointer to Rectangle structure
NOTES
Unlike the other rect-region primitives, AndRectRegion() cannot
fail.
BUGS
SEE ALSO
AndRegionRegion() OrRectRegion() graphics/regions.h
graphics.library/AndRegionRegion graphics.library/AndRegionRegion
NAME
AndRegionRegion -- Perform 2d AND operation of one region
with second region, leaving result in second region.
SYNOPSIS
status = AndRegionRegion(region1,region2)
d0 a0 a1
BOOL AndRegionRegion(struct Region *, struct Region * );
FUNCTION
Remove any portion of region2 that is not in region1.
INPUTS
region1 - pointer to Region structure
region2 - pointer to Region structure to use and for result
RESULTS
status - return TRUE if successful operation
return FALSE if ran out of memory
BUGS
SEE ALSO
OrRegionRegion() AndRectRegion() graphics/regions.h
graphics.library/Animate graphics.library/Animate
NAME
Animate -- Processes every AnimOb in the current animation list.
SYNOPSIS
Animate(anKey, rp)
A0 A1
void Animate(struct AnimOb **, struct RastPort *);
FUNCTION
For every AnimOb in the list
- update its location and velocities
- call the AnimOb's special routine if one is supplied
- for each component of the AnimOb
- if this sequence times out, switch to the new one
- call this component's special routine if one is supplied
- set the sequence's VSprite's y,x coordinates based
on whatever these routines cause
INPUTS
ankey = address of the variable that points to the head AnimOb
rp = pointer to the RastPort structure
RESULT
BUGS
SEE ALSO
AddAnimOb() graphics/gels.h graphics/rastport.h
graphics.library/AreaCircle graphics.library/AreaCircle
NAME
AreaCircle -- add a circle to areainfo list for areafill.
SYNOPSIS
error = (int) AreaCircle( rp, cx, cy, radius)
D0 A1 D0 D1 D2
ULONG AreaCircle(struct RastPort *, WORD, WORD, UWORD);
FUNCTION
Add circle to the vector buffer. It will be drawn to the rastport when
AreaEnd is executed.
INPUTS
rp - pointer to a RastPort structure
cx, cy - the coordinates of the center of the desired circle.
radius - is the radius of the circle to draw around the centerpoint.
RESULTS
0 if no error
-1 if no space left in vector list
NOTES
This function is actually a macro which calls
AreaEllipse(rp,cx,cy,radius,radius).
SEE ALSO
AreaMove() AreaDraw() AreaCircle() InitArea() AreaEnd()
graphics/rastport.h graphics/gfxmacros.h
graphics.library/AreaDraw graphics.library/AreaDraw
NAME
AreaDraw -- Add a point to a list of end points for areafill.
SYNOPSIS
error = AreaDraw( rp, x, y)
d0 A1 D0:16 D1:16
ULONG AreaDraw( struct RastPort *, SHORT, SHORT);
FUNCTION
Add point to the vector buffer.
INPUTS
rp - points to a RastPort structure.
x,y - are coordinates of a point in the raster.
RESULT
error - zero for success, else -1 if no there was no space
left in the vector list.
BUGS
SEE ALSO
AreaMove() InitArea() AreaEnd() graphics/rastport.h
graphics.library/AreaEllipse graphics.library/AreaEllipse
NAME
AreaEllipse -- add a ellipse to areainfo list for areafill.
SYNOPSIS
error = AreaEllipse( rp, cx, cy, a, b )
d0 a1 d0:16 d1:16 d2:16 d3:16
LONG AreaEllipse( struct RastPort *, SHORT, SHORT, SHORT, SHORT)
FUNCTION
Add an ellipse to the vector buffer. It will be draw when AreaEnd() is
called.
INPUTS
rp - pointer to a RastPort structure
cx - x coordinate of the centerpoint relative to the rastport.
cy - y coordinate of the centerpoint relative to the rastport.
a - the horizontal radius of the ellipse (note: a must be > 0)
b - the vertical radius of the ellipse (note: b must be > 0)
RESULT
error - zero for success, or -1 if there is no space left in the
vector list
SEE ALSO
AreaMove() AreaDraw() AreaCircle() InitArea() AreaEnd()
graphics/rastport.h
graphics.library/AreaEnd graphics.library/AreaEnd
NAME
AreaEnd -- Process table of vectors and ellipses and produce areafill.
SYNOPSIS
error = AreaEnd(rp)
d0 A1
LONG AreaEnd( struct RastPort * );
FUNCTION
Trigger the filling operation.
Process the vector buffer and generate required
fill into the raster planes. After the fill is complete, reinitialize
for the next AreaMove or AreaEllipse. Use the raster set up by
InitTmpRas when generating an areafill mask.
RESULT
error - zero for success, or -1 if an error occured anywhere.
INPUTS
rp - pointer to a RastPort structure which specifies where the filled
regions will be rendered to.
BUGS
SEE ALSO
InitArea() AreaMove() AreaDraw() AreaEllipse() InitTmpRas()
graphics/rastport.h
graphics.library/AreaMove graphics.library/AreaMove
NAME
AreaMove -- Define a new starting point for a new
shape in the vector list.
SYNOPSIS
error = AreaMove( rp, x, y)
d0 a1 d0:16 d1:16
LONG AreaMove( struct RastPort *, SHORT, SHORT );
FUNCTION
Close the last polygon and start another polygon
at (x,y). Add the necessary points to vector
buffer. Closing a polygon may result in the generation
of another AreaDraw() to close previous polygon.
Remember to have an initialized AreaInfo structure attached
to the RastPort.
INPUTS
rp - points to a RastPort structure
x,y - positions in the raster
RETURNS
error - zero for success, or -1 if there is no space left in the
vector list
BUGS
SEE ALSO
InitArea() AreaDraw() AreaEllipse() AreaEnd() graphics/rastport.h
graphics.library/AskFont graphics.library/AskFont
NAME
AskFont -- get the text attributes of the current font
SYNOPSIS
AskFont(rp, textAttr)
A1 A0
void AskFont(struct RastPort *, struct TextAttr *);
FUNCTION
This function fills the text attributes structure with the
attributes of the current font in the RastPort.
INPUTS
rp - the RastPort from which the text attributes are
extracted
textAttr - the TextAttr structure to be filled. Note that
there is no support for a TTextAttr.
RESULT
The textAttr structure is filled with the RastPort's text
attributes.
BUGS
SEE ALSO
graphics/text.h
graphics.library/AskSoftStyle graphics.library/AskSoftStyle
NAME
AskSoftStyle -- Get the soft style bits of the current font.
SYNOPSIS
enable = AskSoftStyle(rp)
D0 A1
ULONG AskSoftStyle(struct RastPort *);
FUNCTION
This function returns those style bits of the current font
that are not intrinsic in the font itself, but
algorithmically generated. These are the bits that are
valid to set in the enable mask for SetSoftStyle().
INPUTS
rp - the RastPort from which the font and style are extracted.
RESULTS
enable - those bits in the style algorithmically generated.
Style bits that are not defined are also set.
BUGS
SEE ALSO
SetSoftStyle() graphics/text.h
graphics.library/AttemptLockLayerRom graphics.library/AttemptLockLayerRom
*
NAME
AttemptLockLayerRom -- Attempt to Lock Layer structure
by rom(gfx lib) code
SYNOPSIS
gotit = AttemptLockLayerRom( layer )
d0 a5
BOOL AttempLockLayerRom( struct Layer * );
FUNCTION
Query the current state of the lock on this Layer. If it is
already locked then return FALSE, could not lock. If the
Layer was not locked then lock it and return TRUE.
This call does not destroy any registers.
This call nests so that callers in this chain will not lock
themselves out.
INPUTS
layer - pointer to Layer structure
RESULT
gotit - TRUE or FALSE depending on whether the Layer was
successfully locked by the caller.
SEE ALSO
LockLayerRom() UnlockLayerRom()
graphics.library/BitMapScale graphics.library/BitMapScale
NAME
BitMapScale -- Perform raster scaling on a bit map. (V36)
SYNOPSIS
BitMapScale(bitScaleArgs)
A0
void BitMapScale(struct BitScaleArgs *);
FUNCTION
Scale a source bit map to a non-overlapping destination
bit map.
INPUTS
bitScaleArgs - structure of parameters describing scale:
bsa_SrcX, bsa_SrcY - origin of the source bits.
bsa_SrcWidth, bsa_SrcHeight - number of bits to scale from in x
and y.
bsa_DestX, bsa_DestY - origin of the destination.
bsa_DestWidth, bsa_DestHeight - resulting number of bits in x
and y. NOTE: these values are set by this function.
bsa_XSrcFactor:bsa_XDestFactor - equivalant to the ratio
srcWidth:destWidth, but not necessarily the same
numbers. Each must be in the range 1..16383.
bsa_YSrcFactor:bsa_YDestFactor - equivalant to the ratio
srcHeight:destHeight, but not necessarily the same
numbers. Each must be in the range 1..16383.
bsa_SrcBitMap - source of the bits to scale.
bsa_DestBitMap - destination for the bits to scale. This had
better be big enough!
bsa_Flags - future scaling options. Set it to zero!
bsa_XDDA, bsa_YDDA - for future use. Need not be set by user.
bsa_Reserved1, bsa_Reserved2 - for future use. Need not be set.
RESULT
The destWidth, destHeight fields are set by this function as
described above.
NOTES
o This function may use the blitter.
o Overlapping source and destination bit maps are not
supported.
o No check is made to ensure destBitMap is big enough: use
ScalerDiv to calculate a destination dimension.
BUGS
o This function does not use the HighRes Agnus 'Big Blit'
facility. You should not use XSrcFactor == XDestFactor,
where SrcWidth or DestWidth > 1024.
o Also, the blitter is used when expanding in the Y direction.
You should not expand in the Y direction if
((DestX & 0xf) + DestWidth) >= 1024 pixels. (Up to 1008 pixels
is always safe).
SEE ALSO
ScalerDiv() graphics/scale.h
graphics.library/BltBitMap graphics.library/BltBitMap
NAME
BltBitMap -- Move a rectangular region of bits in a BitMap.
SYNOPSIS
planecnt = BltBitMap(SrcBitMap, SrcX, SrcY, DstBitMap,
D0 A0 D0:16 D1:16 A1
DstX, DstY, SizeX, SizeY, Minterm, Mask [, TempA])
D2:16 D3:16 D4:16 D5:16 D6:8 D7:8 [A2]
ULONG BltBitMap(struct BitMap *, WORD, WORD, struct BitMap *,
WORD, WORD, WORD, WORD, UBYTE, UBYTE, UWORD *);
FUNCTION
Perform non-destructive blits to move a rectangle from one
area in a BitMap to another area, which can be on a different
BitMap.
This blit is assumed to be friendly: no error conditions (e.g.
a rectangle outside the BitMap bounds) are tested or reported.
INPUTS
SrcBitMap, DstBitMap - the BitMap(s) containing the
rectangles
- the planes copied from the source to the destination are
only those whose plane numbers are identical and less
than the minimum Depth of either BitMap and whose Mask
bit for that plane is non-zero.
- as a special case, if a plane pointer in the SrcBitMap
is zero, it acts as a pointer to a plane of all zeros, and
if the plane pointer is 0xffffffff, it acts as a pointer
to a plane of all ones. (Note: new for V36)
- SrcBitMap and DstBitMap can be identical if they point
to actual planes.
SrcX, SrcY - the x and y coordinates of the upper left corner
of the source rectangle. Valid range is positive
signed integer such that the raster word's offset
0..(32767-Size)
DstX, DstY - the x and y coordinates of the upper left
corner of the destination for the rectangle. Valid
range is as for Src.
SizeX, SizeY - the size of the rectangle to be moved. Valid
range is (X: 1..976; Y: 1..1023 such that final raster
word's offset is 0..32767)
Minterm - the logic function to apply to the rectangle when
A is non-zero (i.e. within the rectangle). B is the
source rectangle and C, D is the destination for the
rectangle.
- $0C0 is a vanilla copy
- $030 inverts the source before the copy
- $050 ignores the source and inverts the destination
- see the hardware reference manual for other combinations
Mask - the write mask to apply to this operation. Bits set
indicate the corresponding planes (if not greater than
the minimum plane count) are to participate in the
operation. Typically this is set to 0xff.
TempA - If the copy overlaps exactly to the left or right
(i.e. the scan line addresses overlap), and TempA is
non-zero, it points to enough chip accessable memory
to hold a line of A source for the blit (ie CHIP RAM).
BitBitMap will allocate (and free) the needed TempA if
none is provided and one is needed. Blit overlap is
determined from the relation of the first non-masked
planes in the source and destination bit maps.
RESULTS
planecnt - the number of planes actually involved in the blit.
NOTES
o This function may use the blitter.
SEE ALSO
ClipBlit() graphics/gfx.h hardware/blit.h
graphics.library/BltBitMapRastPort graphics.library/BltBitMapRastPort
NAME
BltBitMapRastPort -- Blit from source bitmap to destination rastport.
SYNOPSIS
error = BltBitMapRastPort
(srcbm, srcx, srcy, destrp, destX, destY, sizeX, sizeY, minterm)
D0 A0 D0 D1 A1 D2 D3 D4 D5 D6
BOOL BltBitMapRastPort
(struct BitMap *, WORD, WORD, struct RastPort *, WORD, WORD,
WORD, WORD, UBYTE);
FUNCTION
Blits from source bitmap to position specified in destination rastport
using minterm.
INPUTS
srcbm - a pointer to the source bitmap
srcx - x offset into source bitmap
srcy - y offset into source bitmap
destrp - a pointer to the destination rastport
destX - x offset into dest rastport
destY - y offset into dest rastport
sizeX - width of blit in pixels
sizeY - height of blit in rows
minterm - minterm to use for this blit
RESULT
TRUE
BUGS
SEE ALSO
BltMaskBitMapRastPort() graphics/gfx.h graphics/rastport.h
graphics.library/BltClear graphics.library/BltClear
NAME
BltClear - Clear a block of memory words to zero.
SYNOPSIS
BltClear( memBlock, bytecount, flags )
a1 d0 d1
void BltClear( void *, ULONG, ULONG );
FUNCTION
For memory that is local and blitter accessable, the most
efficient way to clear a range of memory locations is
to use the system's most efficient data mover, the blitter.
This command accepts the starting location and count and clears
that block to zeros.
INPUTS
memBloc - pointer to local memory to be cleared
memBlock is assumed to be even.
flags - set bit 0 to force function to wait until
the blit is done.
set bit 1 to use row/bytesperrow.
bytecount - if (flags & 2) == 0 then
even number of bytes to clear.
else
low 16 bits is taken as number of bytes
per row and upper 16 bits taken as
number of rows.
This function is somewhat hardware dependant. In the rows/bytesperrow
mode (with the pre-ECS blitter) rows must be <- 1024. In bytecount mode
multiple runs of the blitter may be used to clear all the memory.
Set bit 2 to use the upper 16 bits of the Flags as the data to fill
memory with instead of 0 (V36).
RESULT
The block of memory is initialized.
BUGS
SEE ALSO
graphics.library/BltMaskBitMapRastPort graphics.library/BltMaskBitMapRastPort
NAME
BltMaskBitMapRastPort -- blit from source bitmap to destination rastport
with masking of source image.
SYNOPSIS
BltMaskBitMapRastPort
(srcbm, srcx, srcy, destrp, destX, destY, sizeX, sizeY,
A0 D0 D1 A1 D2 D3 D4 D5
minterm, bltmask)
D6 A2
void BltMaskBitMapRastPort
(struct BitMap *, WORD, WORD, struct RastPort *, WORD, WORD,
WORD, WORD, UBYTE, APTR);
FUNCTION
Blits from source bitmap to position specified in destination rastport
using bltmask to determine where source overlays destination, and
minterm to determine whether to copy the source image "as is" or
to "invert" the sense of the source image when copying. In either
case, blit only occurs where the mask is non-zero.
INPUTS
srcbm - a pointer to the source bitmap
srcx - x offset into source bitmap
srcy - y offset into source bitmap
destrp - a pointer to the destination rastport
destX - x offset into dest rastport
destY - y offset into dest rastport
sizeX - width of blit in pixels
sizeY - height of blit in rows
minterm - either (ABC|ABNC|ANBC) if copy source and blit thru mask
or (ANBC) if invert source and blit thru mask
bltmask - pointer to the single bit-plane mask, which must be the
same size and dimensions as the planes of the
source bitmap.
RESULT
BUGS
SEE ALSO
BltBitMapRastPort() graphics/gfx.h graphics/rastport.h
graphics.library/BltPattern graphics.library/BltPattern
NAME
BltPattern -- Using standard drawing rules for areafill,
blit through a mask.
SYNOPSIS
BltPattern(rp, mask, xl, yl, maxx, maxy, bytecnt)
a1, a0 d0 d1 d2 d3 d4
void BltPattern
(struct RastPort *, void *, SHORT, SHORT, SHORT, SHORT, SHORT);
FUNCTION
Blit using drawmode,areafill pattern, and mask
at position rectangle (xl,yl) (maxx,maxy).
INPUTS
rp - points to the destination RastPort for the blit.
mask - points to 2 dimensional mask if needed
if mask == NULL then use a rectangle.
xl,yl - coordinates of upper left of rectangular region in RastPort
maxx,maxy - points to lower right of rectangular region in RastPort
bytecnt - BytesPerRow for mask
RESULT
SEE ALSO
AreaEnd
graphics.library/BltTemplate graphics.library/BltTemplate
NAME
BltTemplate -- Cookie cut a shape in a rectangle to the RastPort.
SYNOPSIS
BltTemplate(SrcTemplate, SrcX, SrcMod, rp,
A0 D0:16 D1:16 A1
DstX, DstY, SizeX, SizeY)
D2:16 D3:16 D4:16 D5:16
void BltTemplate(UWORD *, WORD, WORD, struct RastPort *,
WORD, WORD, WORD, WORD);
FUNCTION
This function draws the image in the template into the
RastPort in the current color and drawing mode at the
specified position. The template is assumed not to overlap
the destination.
If the template falls outside the RastPort boundary, it is
truncated to that boundary.
Note: the SrcTemplate pointer should point to the "nearest" word
(rounded down) of the template mask. Fine alignment of the mask
is acheived by setting the SrcX bit offseet within the range
of 0 to 15 decimal.
INPUTS
SrcTemplate - pointer to the first (nearest) word of the template mask.
SrcX - x bit offset into the template mask (range 0..15).
SrcMod - number of bytes per row in template mask.
rp - pointer to destination RastPort.
DstX, DstY - x and y coordinates of the upper left
corner of the destination for the blit.
SizeX, SizeY - size of the rectangle to be used as the
template.
NOTES
o This function may use the blitter.
SEE ALSO
BltBitMap() graphics/rastport.h
graphics.library/CBump graphics.library/CBump
NAME
CBump - increment user copper list pointer (bump to next position in list).
SYNOPSIS
CBump( c )
a1
void CBump( struct UCopList * );
FUNCTION
Increment pointer to space for next instruction in user copper list.
INPUTS
c - pointer to UCopList structure
RESULTS
User copper list pointer is incremented to next position.
Pointer is repositioned to next user copperlist instruction block
if the current block is full.
Note: CBump is usually invoked for the programmer as part of the
macro definitions CWAIT or CMOVE.
BUGS
SEE ALSO
CINIT CWAIT CMOVE CEND graphics/copper.h
graphics.library/CEND graphics.library/CEND
NAME
CEND -- Terminate user copper list.
SYNOPSIS
CEND( c )
struct UCopList *c;
FUNCTION
Add instruction to terminate user copper list.
INPUTS
c - pointer to UCopList structure
RESULTS
This is actually a macro that calls the macro CWAIT(c,10000,255)
10000 is a magical number that the graphics.library uses.
I hope display technology doesn't catch up too fast!
BUGS
SEE ALSO
CINIT CWAIT CMOVE graphics/copper.h
graphics.library/ChangeSprite graphics.library/ChangeSprite
NAME
ChangeSprite -- Change the sprite image pointer.
SYNOPSIS
ChangeSprite( vp, s, newdata)
a0 a1 a2
void ChangeSprite(struct ViewPort *, struct SimpleSprite *, void * )
FUNCTION
The sprite image is changed to use the data starting at newdata
INPUTS
vp - pointer to ViewPort structure that this sprite is
relative to, or 0 if relative only top of View
s - pointer to SimpleSprite structure
newdata - pointer to data structure of the following form.
struct spriteimage
{
UWORD posctl[2]; /* used by simple sprite machine*/
UWORD data[height][2]; /* actual sprite image */
UWORD reserved[2]; /* initialized to */
/* 0x0,0x0 */
};
The programmer must initialize reserved[2]. Spriteimage must be
in CHIP memory. The height subfield of the SimpleSprite structure
must be set to reflect the height of the new spriteimage BEFORE
calling ChangeSprite(). The programmer may allocate two sprites to
handle a single attached sprite. After GetSprite(), ChangeSprite(),
the programmer can set the SPRITE_ATTACHED bit in posctl[1] of the
odd numbered sprite.
If you need more than 8 sprites, look up VSprites in the
graphics documentation.
RESULTS
BUGS
SEE ALSO
FreeSprite() ChangeSprite() MoveSprite() AddVSprite() graphics/sprite.h
graphics.library/CINIT graphics.library/CINIT
NAME
CINIT -- Initialize user copperlist to accept intermediate
user copper instructions.
SYNOPSIS
cl = CINIT( ucl , n )
cl = UCopperListInit( ucl , n )
a0 d0
struct CopList *UCopperListInit( struct UCopList *, UWORD );
FUNCTION
Allocates and/or initialize copperlist structures/buffers
internal to a UCopList structure.
This is a macro that calls UCopListInit. You must pass a
(non-initialized) UCopList to CINIT (CINIT will NOT allocate
a new UCopList if ucl==0 ). If (ucl != 0) it will initialize the
intermediate data buffers internal to a UCopList.
The maximum number of intermediate copper list instructions
that these internal CopList data buffers contain is specified
as the parameter n.
INPUTS
ucl - pointer to UCopList structure
n - number of instructions buffer must be able to hold
RESULTS
cl- a pointer to a buffer which will accept n intermediate copper
instructions.
NOTE: this is NOT a UCopList pointer, rather a pointer to the
UCopList's->FirstCopList sub-structure.
BUGS
CINIT will not actually allocate a new UCopList if ucl==0.
Instead you must allocate a block MEMF_PUBLIC|MEMF_CLEAR, the
sizeof(struct UCopList) and pass it to this function.
The system's FreeVPortCopLists function will take care of
deallocating it if they are called.
Prior to release V36 the CINIT macro had { } braces surrounding
the definition, preventing the proper return of the result value.
These braces have been removed for the V36 include definitions.
SEE ALSO
CINIT CMOVE CEND graphics/copper.h
graphics.library/ClearEOL graphics.library/ClearEOL
NAME
ClearEOL -- Clear from current position to end of line.
SYNOPSIS
ClearEOL(rp)
A1
void ClearEOL(struct RastPort *);
FUNCTION
Clear a rectangular swath from the current position to the
right edge of the rastPort. The height of the swath is taken
from that of the current text font, and the vertical
positioning of the swath is adjusted by the text baseline,
such that text output at this position would lie wholly on
this newly cleared area.
Clearing consists of setting the color of the swath to zero,
or, if the DrawMode is 2, to the BgPen.
INPUTS
rp - pointer to RastPort structure
RESULT
NOTES
o This function may use the blitter.
SEE ALSO
Text() ClearScreen() SetRast()
graphics/text.h graphics/rastport.h
graphics.library/ClearRectRegion graphics.library/ClearRectRegion
NAME
ClearRectRegion -- Perform 2d CLEAR operation of rectangle
with region, leaving result in region.
SYNOPSIS
status = ClearRectRegion(region,rectangle)
d0 a0 a1
BOOL ClearRectRegion(struct Region *, struct Rectangle * );
FUNCTION
Clip away any portion of the region that exists inside
of the rectangle. Leave the result in region.
INPUTS
region - pointer to Region structure
rectangle - pointer to Rectangle structure
RESULTS
status - return TRUE if successful operation
return FALSE if ran out of memory
BUGS
SEE ALSO
AndRectRegion() graphics/regions.h
graphics.library/ClearRegion graphics.library/ClearRegion
NAME
ClearRegion -- Remove all rectangles from region.
SYNOPSIS
ClearRegion(region)
a0
void ClearRegion( struct Region * );
FUNCTION
Clip away all rectangles in the region leaving nothing.
INPUTS
region - pointer to Region structure
BUGS
SEE ALSO
NewRegion() graphics/regions.h
graphics.library/ClearScreen graphics.library/ClearScreen
NAME
ClearScreen -- Clear from current position to end of RastPort.
SYNOPSIS
ClearScreen(rp)
A1
void ClearScreen(struct RastPort *);
FUNCTION
Clear a rectangular swath from the current position to the
right edge of the rastPort with ClearEOL, then clear the rest
of the screen from just beneath the swath to the bottom of
the rastPort.
Clearing consists of setting the color of the swath to zero,
or, if the DrawMode is 2, to the BgPen.
INPUTS
rp - pointer to RastPort structure
NOTES
o This function may use the blitter.
SEE ALSO
ClearEOL() Text() SetRast()
graphics/text.h graphics/rastport.h
graphics.library/ClipBlit graphics.library/ClipBlit
NAME
ClipBlit -- Calls BltBitMap() after accounting for windows
SYNOPSIS
ClipBlit(Src, SrcX, SrcY, Dest, DestX, DestY, XSize, YSize, Minterm)
A0 D0 D1 A1 D2 D3 D4 D5 D6
void ClipBlit
(struct RastPort *, WORD, WORD, struct RastPort *, WORD, WORD,
WORD, WORD, UBYTE);
FUNCTION
Performs the same function as BltBitMap(), except that it
takes into account the Layers and ClipRects of the layer library,
all of which are (and should be) transparent to you. So, whereas
BltBitMap() requires pointers to BitMaps, ClipBlit requires pointers to
the RastPorts that contain the Bitmaps, Layers, etcetera.
If you are going to blit blocks of data around via the RastPort of your
Intuition Window, you must call this routine (rather than BltBitMap()).
Either the Src RastPort, the Dest RastPort, both, or neither, can have
Layers. This routine takes care of all cases.
See BltBitMap() for a thorough explanation.
INPUTS
Src = pointer to the RastPort of the source for your blit
SrcX, SrcY = the topleft offset into Src for your data
Dest = pointer to the RastPort to receive the blitted data
DestX, DestY = the topleft offset into the destination RastPort
XSize = the width of the blit
YSize = the height of the blit
Minterm = the boolean blitter function, where SRCB is associated
with the Src RastPort and SRCC goes to the Dest RastPort
RESULT
BUGS
SEE ALSO
BltBitMap();
graphics.library/CloseFont graphics.library/CloseFont
NAME
CloseFont -- Release a pointer to a system font.
SYNOPSIS
CloseFont(font)
A1
void CloseFont(struct TextFont *);
FUNCTION
This function indicates that the font specified is no longer
in use. It is used to close a font opened by OpenFont, so
that fonts that are no longer in use do not consume system
resources.
INPUTS
font - a font pointer as returned by OpenFont() or OpenDiskFont()
RESULT
BUGS
SEE ALSO
OpenFont() diskfont.library/OpenDiskFont graphics/text.h
graphics.library/CloseMonitor graphics.library/CloseMonitor
NAME
CloseMonitor -- close a MonitorSpec (V36)
SYNOPSIS
error = CloseMonitor( monitor_spec )
d0 a0
LONG CloseMonitor( struct MonitorSpec * );
FUNCTION
Relinquish access to a MonitorSpec.
INPUTS
monitor_spec - a pointer to a MonitorSpec opened via OpenMonitor()
RESULTS
error - FALSE if MonitorSpec closed uneventfully.
TRUE if MonitorSpec could not be closed.
BUGS
SEE ALSO
OpenMonitor()
graphics.library/CMOVE graphics.library/CMOVE
NAME
CMOVE -- append copper move instruction to user copper list.
SYNOPSIS
CMOVE( c , a , v )
CMove( c , a , v )
a1 d0 d1
CBump( c )
a1
void CMove( struct UCopList *, void *, WORD );
FUNCTION
Add instruction to move value v to hardware register a.
INPUTS
c - pointer to UCopList structure
a - hardware register
v - 16 bit value to be written
RESULTS
This is actually a macro that calls CMove(c,&a,v)
and then calls CBump(c) to bump the local pointer
to the next instruction. Watch out for macro side affects.
BUGS
SEE ALSO
CINIT CWAIT CEND graphics/copper.h
graphics.library/CopySBitMap graphics.library/CopySBitMap
NAME
CopySBitMap -- Syncronize Layer window with contents of
Super BitMap
SYNOPSIS
CopySBitMap( layer )
a0
void CopySBitMap(struct Layer *);
FUNCTION
This is the inverse of SyncSBitMap.
Copy all bits from SuperBitMap to Layer bounds.
This is used for those functions that do not
want to deal with the ClipRect structures but do want
to be able to work with a SuperBitMap Layer.
INPUTS
layer - pointer to a SuperBitMap Layer
The Layer must already be locked by the caller.
BUGS
SEE ALSO
LockLayerRom() SyncSBitMap()
graphics.library/CWAIT graphics.library/CWAIT
NAME
CWAIT -- Append copper wait instruction to user copper list.
SYNOPSIS
CWAIT( c , v , h )
CWait( c , v , h )
a1 d0 d1
CBump( c )
a1
void CWait( struct UCopList *, WORD, WORD)
FUNCTION
Add instruction to wait for vertical beam position v and
horizontal position h to this intermediate copper list.
INPUTS
c - pointer to UCopList structure
v - vertical beam position (relative to top of viewport)
h - horizontal beam position
RESULTS
this is actually a macro that calls CWait(c,v,h)
and then calls CBump(c) to bump the local pointer
to the next instruction.
BUGS
User waiting for horizontal values of greater than 222 decimal
is illegal.
SEE ALSO
CINIT CMOVE CEND graphics/copper.h
graphics.library/DisownBlitter graphics.library/DisownBlitter
NAME
DisownBlitter - return blitter to free state.
SYNOPSIS
DisownBlitter()
void DisownBlitter( void );
FUNCTION
Free blitter up for use by other blitter users.
INPUTS
RETURNS
SEE ALSO
OwnBlitter()
graphics.library/DisposeRegion graphics.library/DisposeRegion
NAME
DisposeRegion -- Return all space for this region to free
memory pool.
SYNOPSIS
DisposeRegion(region)
a0
void DisposeRegion( struct Region * );
FUNCTION
Free all RegionRectangles for this Region then
free the Region itself.
INPUTS
region - pointer to Region structure
BUGS
SEE ALSO
NewRegion() graphics/regions.h
graphics.library/DoCollision graphics.library/DoCollision
NAME
DoCollision -- Test every gel in gel list for collisions.
SYNOPSIS
DoCollision(rp)
A1
void DoCollision(struct RastPort *);
FUNCTION
Tests each gel in gel list for boundary and gel-to-gel collisions.
On detecting one of these collisions, the appropriate collision-
handling routine is called. See the documentation for a thorough
description of which collision routine is called. This routine
expects to find the gel list correctly sorted in Y,X order.
The system routine SortGList performs this function for the user.
INPUTS
rp = pointer to a RastPort
RESULT
BUGS
SEE ALSO
InitGels() SortGList() graphics/gels.h graphics/gels.h
graphics.library/Draw graphics.library/Draw
NAME
Draw -- Draw a line between the current pen position
and the new x,y position.
SYNOPSIS
Draw( rp, x, y)
a1 d0:16 d1:16
void Draw( struct RastPort *, SHORT, SHORT);
FUNCTION
Draw a line from the current pen position to (x,y).
INPUTS
rp - pointer to the destination RastPort
x,y - coordinates of where in the RastPort to end the line.
BUGS
SEE ALSO
Move() graphics/rastport.h
graphics.library/DrawEllipse graphics.library/DrawEllipse
NAME
DrawEllipse -- Draw an ellipse centered at cx,cy with vertical
and horizontal radii of a,b respectively.
SYNOPSIS
DrawEllipse( rp, cx, cy, a, b )
a1 d0 d1 d2 d3
void DrawEllipse( struct RastPort *, SHORT, SHORT, SHORT, SHORT);
FUNCTION
Creates an elliptical outline within the rectangular region
specified by the parameters, using the current foreground pen color.
INPUTS
rp - pointer to the RastPort into which the ellipse will be drawn.
cx - x coordinate of the centerpoint relative to the rastport.
cy - y coordinate of the centerpoint relative to the rastport.
a - the horizontal radius of the ellipse (note: a must be > 0)
b - the vertical radius of the ellipse (note: b must be > 0)
BUGS
NOTES
this routine does not clip the ellipse to a non-layered rastport.
SEE ALSO
DrawCircle(), graphics/rastport.h
graphics.library/DrawGList graphics.library/DrawGList
NAME
DrawGList -- Process the gel list, queueing VSprites, drawing Bobs.
SYNOPSIS
DrawGList(rp, vp)
A1 A0
void DrawGList(struct RastPort *, struct ViewPort *);
FUNCTION
Performs one pass of the current gel list.
- If nextLine and lastColor are defined, these are
initialized for each gel.
- If it's a VSprite, build it into the copper list.
- If it's a Bob, draw it into the current raster.
- Copy the save values into the "old" variables,
double-buffering if required.
INPUTS
rp = pointer to the RastPort where Bobs will be drawn
vp = pointer to the ViewPort for which VSprites will be created
RESULT
BUGS
MUSTDRAW isn't implemented yet.
SEE ALSO
InitGels() graphics/gels.h graphics/rastport.h graphics/view.h
graphics.library/EraseRect graphics.library/EraseRect
NAME
EraseRect -- Fill a defined rectangular area using the current
BackFill hook. (V36)
SYNOPSIS
EraseRect( rp, xmin, ymin, xmax, ymax)
a1 d0:16 d1:16 d2:16 d3:16
void EraseRect(struct RastPort *, SHORT, SHORT, SHORT, SHORT);
FUNCTION
Fill the rectangular region specified by the parameters with the
BackFill hook. If non-layered, the rectangular region specified by
the parameters is cleared. If layered the Layer->BackFill Hook is used.
INPUTS
rp - pointer to a RastPort structure
xmin - x coordinate of the upper left corner of the region to fill.
ymin - y coordinate of the upper left corner of the region to fill.
xmax - x coordinate of the lower right corner of the region to fill.
ymax - y coordinate of the lower right corner of the region to fill.
BUGS
NOTES
The following relation MUST be true:
(xmax >= xmin) and (ymax >= ymin)
SEE ALSO
graphics/rastport.h graphics/clip.h
graphics.library/ExtendFont graphics.library/ExtendFont
NAME
ExtendFont -- ensure tf_Extension has been built for a font (V36)
SYNOPSIS
success = ExtendFont(font, fontTags)
D0 A0 A1
ULONG ExtendFont(struct TextFont *, struct TagItem *);
SEE ALSO
graphics/text.h
graphics.library/FindDisplayInfo graphics.library/FindDisplayInfo
NAME
FindDisplayInfo -- search for a record identified by a specific key (V36)
SYNOPSIS
handle = FindDisplayInfo(ID)
D0 D0
DisplayInfoHandle FindDisplayInfo(ULONG);
FUNCTION
Given a 32-bit Mode Key, return a handle to a valid DisplayInfoRecord
found in the graphics database. Using this handle, you can obtain
information about this Mode, including its default dimensions,
properties, and whether it is currently available for use.
INPUTS
ID - unsigned long identifier
RESULT
handle - handle to a displayinfo Record with that key
or NULL if no match.
BUGS
SEE ALSO
graphics/displayinfo.h
graphics.library/Flood graphics.library/Flood
NAME
Flood -- Flood rastport like areafill.
SYNOPSIS
error = Flood( rp, mode, x, y)
d0 a1 d2 d0 d1
BOOL Flood(struct RastPort *, ULONG, SHORT, SHORT);
FUNCTION
Search the BitMap starting at (x,y).
Fill all adjacent pixels if they are:
Mode 0: not the same color as AOLPen
Mode 1: the same color as the pixel at (x,y)
When actually doing the fill use the modes that apply to
standard areafill routine such as drawmodes and patterns.
INPUTS
rp - pointer to RastPort
(x,y) - coordinate in BitMap to start the flood fill at.
mode - 0 fill all adjacent pixels searching for border.
1 fill all adjacent pixels that have same pen number
as the one at (x,y).
NOTES
In order to use Flood, the destination RastPort must
have a valid TmpRas raster whose size is as large as
that of the RastPort.
SEE ALSO
AreaEnd() InitTmpRas() graphics/rastport.h
graphics.library/FontExtent graphics.library/FontExtent
NAME
FontExtent -- get the font attributes of the current font (V36)
SYNOPSIS
FontExtent(font, fontExtent)
A0 A1
void FontExtent(struct TextFont *, struct TextExtent *);
FUNCTION
This function fills the text extent structure with a bounding
(i.e. maximum) extent for the characters in the specified font.
INPUTS
font - the TextFont from which the font metrics are extracted.
fontExtent - the TextExtent structure to be filled.
RESULT
fontExtent is filled.
NOTES
The TextFont, not the RastPort, is specified -- unlike
TextExtent(), effect of algorithmic enhancements is not
included, nor does te_Width include any effect of
rp_TxSpacing. The returned te_Width will be negative only
when FPF_REVPATH is set in the tf_Flags of the font -- the
effect of left-moving characters is ignored for the width of
a normal font, and the effect of right-moving characters is
ignored if a REVPATH font. These characters will, however,
be reflected in the bounding extent.
SEE ALSO
TextExtent() graphics/text.h
graphics.library/FreeColorMap graphics.library/FreeColorMap
NAME
FreeColorMap -- Free the ColorMap structure and return memory
to free memory pool.
SYNOPSIS
FreeColorMap( colormap )
a0
void FreeColorMap(struct ColorMap *);
FUNCTION
Return the memory to the free memory pool that was allocated
with GetColorMap.
INPUTS
colormap - pointer to ColorMap allocated with GetColorMap
RESULT
The space is made available for others to use.
BUGS
SEE ALSO
SetRGB4() GetColorMap() graphics/view.h
graphics.library/FreeCopList graphics.library/FreeCopList
NAME
FreeCopList -- deallocate intermediate copper list
SYNOPSIS
FreeCopList(coplist)
a0
void FreeCopList( struct CopList *);
FUNCTION
Deallocate all memory associated with this copper list.
INPUTS
coplist - pointer to structure CopList
RESULTS
memory returned to memory manager
BUGS
SEE ALSO
graphics/copper.h
graphics.library/FreeCprList graphics.library/FreeCprList
NAME
FreeCprList -- deallocate hardware copper list
SYNOPSIS
FreeCprList(cprlist)
a0
void FreeCprList(struct cprlist *);
FUNCTION
return cprlist to free memory pool
INPUTS
cprlist - pointer to cprlist structure
RESULTS
memory returned and made available to other tasks
BUGS
SEE ALSO
graphics/copper.h
graphics.library/FreeGBuffers graphics.library/FreeGBuffers
NAME
FreeGBuffers -- Deallocate memory obtained by GetGBufers.
SYNOPSIS
FreeGBuffers(anOb, rp, db)
A0 A1 D0
void FreeGBuffers(struct AnimOb *, struct RastPort *, BOOL);
FUNCTION
For each sequence of each component of the AnimOb,
deallocate memory for:
SaveBuffer
BorderLine
CollMask and ImageShadow (point to same buffer)
if db is set (user had used double-buffering) deallocate:
DBufPacket
BufBuffer
INPUTS
anOb = pointer to the AnimOb structure
rp = pointer to the current RastPort
db = double-buffer indicator (set TRUE for double-buffering)
RESULT
BUGS
SEE ALSO
GetGBuffers() graphics/gels.h graphics/rastport.h
graphics.library/FreeRaster graphics.library/FreeRaster
NAME
FreeRaster -- Release an allocated area to the system free memory pool
.
SYNOPSIS
FreeRaster( p, width, height)
a0 d0:16 d1:16
void FreeRaster( PLANEPTR, USHORT, USHORT);
FUNCTION
Return the memory associated with this PLANEPTR of size
width and height to the MEMF_CHIP memory pool.
INPUTS
p = a pointer to a memory space returned as a
result of a call to AllocRaster.
width - the width in bits of the bitplane.
height - number of rows in bitplane.
BUGS
NOTES
Width and height should be the same values with which you
called AllocRaster in the first place.
SEE ALSO
AllocRaster() graphics/gfx.h
graphics.library/FreeSprite graphics.library/FreeSprite
NAME
FreeSprite -- Return sprite for use by others and virtual
sprite machine.
SYNOPSIS
FreeSprite( pick )
d0
void FreeSprite( WORD );
FUNCTION
Mark sprite as available for others to use.
These sprite routines are provided to ease sharing of sprite
hardware and to handle simple cases of sprite usage and
movement. It is assumed the programs that use these routines
do want to be good citizens in their hearts. ie: they will
not FreeSprite unless they actually own the sprite.
The Virtual Sprite machine may ignore the simple sprite machine.
INPUTS
pick - number in range of 0-7
RESULTS
sprite made available for subsequent callers of GetSprite
as well as use by Virtual Sprite Machine.
BUGS
SEE ALSO
GetSprite() ChangeSprite() MoveSprite() graphics/sprite.h
graphics.library/FreeVPortCopLists graphics.library/FreeVPortCopLists
NAME
FreeVPortCopLists -- deallocate all intermediate copper lists and
their headers from a viewport
SYNOPSIS
FreeVPortCopLists(vp)
a0
void FreeVPortCopLists(struct ViewPort *);
FUNCTION
Search display, color, sprite, and user copper
lists and call FreeMem() to deallocate them from memory
INPUTS
vp - pointer to ViewPort structure
RESULTS
The memory allocated to the various copper lists will be returned
to the system's free memory pool, and the following fields in
the viewport structure will be set to NULL:
DspIns, Sprins, ClrIns, UCopIns
BUGS
none known
SEE ALSO
graphics/view.h
graphics.library/GetColorMap graphics.library/GetColorMap
NAME
GetColorMap -- allocate and initialize Colormap
SYNOPSIS
cm = GetColorMap( entries )
d0 d0
struct ColorMap *GetColorMap( ULONG);
FUNCTION
Allocates, initializes and returns a pointer to a ColorMap
data structure, later enabling calls to SetRGB4
and LoadRGB4 to load colors for a view port. The ColorTable
pointer in the ColorMap structure points to a hardware
specific colormap data structure. You should not count on
it being anything you can understand. Use GetRGB4() to
query it or SetRGB4CM to set it directly.
INPUTS
entries - number of entries for this colormap
RESULT
The pointer value returned by this routine, if nonzero,
may be stored into the ViewPort.ColorMap pointer.
If a value of 0 is returned, the system was unable
to allocate enough memory space for the required
data structures.
BUGS
SEE ALSO
SetRGB4() FreeColorMap()
graphics.library/GetDisplayInfoData graphics.library/GetDisplayInfoData
NAME
GetDisplayInfoData -- query DisplayInfo Record parameters (V36)
SYNOPSIS
result = GetDisplayInfoData(handle, buf, size, tagID, [ID])
D0 A0 A1 D0 D1 [D2]
ULONG GetDisplayInfoData(DisplayInfoHandle, UBYTE *, ULONG, ULONG, ULONG);
FUNCTION
GetDisplayInfoData() fills a buffer with data meaningful to the
DisplayInfoRecord pointed at by your valid handle. The data type
that you are interested in is indicated by a tagID for that chunk.
The types of tagged information that may be available include:
DTAG_DISP: (DisplayInfo) - properties and availability information.
DTAG_DIMS: (DimensionInfo) - default dimensions and overscan info.
DTAG_MNTR: (MonitorInfo) - type, position, scanrate, and compatibility
DTAG_NAME: (NameInfo) - a user friendly way to refer to this mode.
INPUTS
handle - displayinfo handle
buf - pointer to destination buffer
size - buffer size in bytes
tagID - data chunk type
ID - displayinfo identifier, optionally used if handle is NULL
RESULT
result - if positive, number of bytes actually transferred
if zero, no information for ID was available
BUGS
SEE ALSO
FindDisplayInfo(), NextDisplayInfo()
graphics/displayinfo.h
graphics.library/GetGBuffers graphics.library/GetGBuffers
NAME
GetGBuffers -- Attempt to allocate ALL buffers of an entire AnimOb.
SYNOPSIS
status = GetGBuffers(anOb, rp, db)
D0 A0 A1 D0
BOOL GetGBuffers(struct AnimOb *, struct RastPort *, BOOL);
FUNCTION
For each sequence of each component of the AnimOb, allocate memory for:
SaveBuffer
BorderLine
CollMask and ImageShadow (point to same buffer)
if db is set TRUE (user wants double-buffering) allocate:
DBufPacket
BufBuffer
INPUTS
anOb = pointer to the AnimOb structure
rp = pointer to the current RastPort
db = double-buffer indicator (set TRUE for double-buffering)
RESULT
status = TRUE if the memory allocations were all successful, else FALSE
BUGS
If any of the memory allocations fail it does not free the partial
allocations that did succeed.
SEE ALSO
FreeGBuffers() graphics/gels.h
graphics.library/GetRGB4 graphics.library/GetRGB4
NAME
GetRGB4 -- Inquire value of entry in ColorMap.
SYNOPSIS
value = GetRGB4( colormap, entry )
d0 a0 d0
ULONG GetRGB4(struct ColorMap *, LONG);
FUNCTION
Read and format a value from the ColorMap.
INPUTS
colormap - pointer to ColorMap structure
entry - index into colormap
RESULT
returns -1 if no valid entry
return UWORD RGB value 4 bits per gun right justified
NOTE
Intuition's DisplayBeep() changes color 0. Reading Color 0 during a
DisplayBeep() will lead to incorrect results.
BUGS
SEE ALSO
SetRGB4() LoadRGB4() GetColorMap() FreeColorMap() graphics/view.h
graphics.library/GetSprite graphics.library/GetSprite
NAME
GetSprite -- Attempt to get a sprite for the simple sprite
manager.
SYNOPSIS
Sprite_Number = GetSprite( sprite, pick )
d0 a0 d0
SHORT GetSprite( struct SimpleSprite *, SHORT );
FUNCTION
Attempt to allocate one of the eight sprites for private use
with the simple sprite manager. This must be done before using
further calls to the simple sprite machine. If the programmer
wants to use 15 color sprites, they must allocate both sprites
and set the 'SPRITE_ATTACHED' bit in the odd sprite's posctldata
array.
INPUTS
sprite - ptr to programmers SimpleSprite structure.
pick - number in the range of 0-7 or
-1 if programmer just wants the next one.
RESULTS
If pick is 0-7 attempt to allocate the sprite. If the sprite
is already allocated then return -1.
If pick -1 allocate the next sprite starting search at 0.
If no sprites are available return -1 and fill -1 in num entry
of SimpleSprite structure.
If the sprite is available for allocation, mark it allocated
and fill in the 'num' entry of the SimpleSprite structure.
If successful return the sprite number.
BUGS
SEE ALSO
FreeSprite() ChangeSprite() MoveSprite() GetSprite() graphics/sprite.h
graphics.library/GetVPModeID graphics.library/GetVPModeID
NAME
GetVPModeID -- get the 32 bit DisplayID from a ViewPort. (V36)
SYNOPSIS
modeID = GetVPModeID( vp )
d0 a0
ULONG GetVPModeID( struct ViewPort *);
FUNCTION
returns the normal display modeID, if one is currently associated
with this ViewPort.
INPUTS
vp -- pointer to a ViewPort structure.
RESULT
modeID -- a 32 bit DisplayInfoRecord identifier associated with
this ViewPort, or INVALID_ID.
NOTES
Test the return value of this function against INVALID_ID, not NULL.
(INVALID_ID is defined in graphics/displayinfo.h).
BUGS
SEE ALSO
graphics/displayinfo.h, ModeNotAvailable()
graphics.library/GfxAssociate graphics.library/GfxAssociate
NAME
GfxAssociate -- associate a graphics extended node with a given pointer
(V36)
SYNOPSIS
GfxAssociate(pointer, node);
A0 A1
void GfxAssociate(VOID *, struct ExtendedNode *);
FUNCTION
Associate a special graphics extended data structure (each of which
begins with an ExtendedNode structure) with another structure via
the other structure's pointer. Later, when you call GfxLookUp()
with the other structure's pointer you may retrieve a pointer
to this special graphics extended data structure, if it is
available.
INPUTS
pointer = a pointer to a data structure.
node = an ExtendedNode structure to associate with the pointer
RESULT
an association is created between the pointer and the node such
that given the pointer the node can be retrieved via GfxLookUp().
BUGS
SEE ALSO
graphics/gfxnodes.h GfxNew() GfxFree() GfxLookUp()
graphics.library/GfxFree graphics.library/GfxFree
NAME
GfxFree -- free a graphics extended data structure (V36)
SYNOPSIS
GfxFree( node );
a0
void GfxFree(struct ExtendedNode *);
FUNCTION
Free a special graphics extended data structure (each of which
begins with an ExtendedNode structure).
INPUTS
node = pointer to a graphics extended data structure obtained via
GfxNew().
RESULT
the node is deallocated from memory. graphics will dissassociate
this special graphics extended node from any associated data
structures, if necessary, before freeing it (see GfxAssociate()).
BUGS
an Alert() will be called if you attempt to free any structure
other than a graphics extended data strucure obtained via GfxFree().
SEE ALSO
graphics/gfxnodes.h GfxNew() GfxAssociate() GfxLookUp()
graphics.library/GfxLookUP graphics.library/GfxLookUP
NAME
GfxLookUp -- find a graphics extended node associated with a
given pointer (V36)
SYNOPSIS
result = GfxLookUp( pointer );
d0 a0
struct ExtendedNode *GfxLookUp( void *);
FUNCTION
Finds a special graphics extended data structure (if any) associated
with the pointer to a data structure (eg: ViewExtra associated with
a View structure).
INPUTS
pointer = a pointer to a data structure which may have an
ExtendedNode associated with it (typically a View ).
RESULT
result = a pointer to the ExtendedNode that has previously been
associated with the pointer.
BUGS
SEE ALSO
graphics/gfxnodes.h GfxNew() GfxFree() GfxAssociate()
graphics.library/GfxNew graphics.library/GfxNew
NAME
GfxNew -- allocate a graphics extended data structure (V36)
SYNOPSIS
result = GfxNew( node_type );
d0 d0
struct ExtendedNode *GfxNew( ULONG);
FUNCTION
Allocate a special graphics extended data structure (each of which
begins with an ExtendedNode structure). The type of structure to
be allocated is specified by the node_type identifier.
INPUTS
node_type = which type of graphics extended data structure to allocate.
(see gfxnodes.h for identifier definitions.)
RESULT
result = a pointer to the allocated graphics node or NULL if the
allocation failed.
BUGS
SEE ALSO
graphics/gfxnodes.h GfxFree() GfxAssociate() GfxLookUp()
graphics.library/InitArea graphics.library/InitArea
NAME
InitArea -- Initialize vector collection matrix
SYNOPSIS
InitArea( areainfo, buffer, maxvectors )
a0 a1 d0
void InitArea(struct AreaInfo *, void *, SHORT);
FUNCTION
This function provides initialization for the vector collection matrix
such that it has a size of (max vectors ). The size of the region
pointed to by buffer (short pointer) should be five (5) times as large
as maxvectors. This size is in bytes. Areafills done by using AreaMove,
AreaDraw, and AreaEnd must have enough space allocated in this table to
store all the points of the largest fill. AreaEllipse takes up two
vectors for every call. If AreaMove/Draw/Ellipse detect too many
vectors going into the buffer they will return -1.
INPUTS
areainfo - pointer to AreaInfo structure
buffer - pointer to chunk of memory to collect vertices
maxvectors - max number of vectors this buffer can hold
RESULT
Pointers are set up to begin storage of vectors done by
AreaMove, AreaDraw, and AreaEllipse.
BUGS
SEE ALSO
AreaEnd() AreaMove() AreaDraw() AreaEllipse() graphics/rastport.h
graphics.library/InitBitMap graphics.library/InitBitMap
NAME
InitBitMap -- Initialize bit map structure with input values.
SYNOPSIS
InitBitMap( bm, depth, width, height )
a0 d0 d1 d2
void InitBitMap( struct BitMap *, BYTE, UWORD, UWORD );
FUNCTION
Initialize various elements in the BitMap structure to
correctly reflect depth, width, and height.
Must be used before use of BitMap in other graphics calls.
The Planes[8] are not initialized and need to be set up
by the caller. The Planes table was put at the end of the
structure so that it may be truncated to conserve space,
as well as extended. All routines that use BitMap should
only depend on existence of depth number of bitplanes.
The Flagsh and pad fields are reserved for future use and
should not be used by application programs.
INPUTS
bm - pointer to a BitMap structure (gfx.h)
depth - number of bitplanes that this bitmap will have
width - number of bits (columns) wide for this BitMap
height- number of bits (rows) tall for this BitMap
BUGS
SEE ALSO
graphics/gfx.h
graphics.library/InitGels graphics.library/InitGels
NAME
InitGels -- initialize a gel list; must be called before using gels.
SYNOPSIS
InitGels(head, tail, GInfo)
A0 A1 A2
void InitGels(struct VSprite *, struct VSprite *, struct GelsInfo *);
FUNCTION
Assigns the VSprites as the head and tail of the gel list in GfxBase.
Links these two gels together as the keystones of the list.
If the collHandler vector points to some memory array, sets
the BORDERHIT vector to NULL.
INPUTS
head = pointer to the VSprite structure to be used as the gel list head
tail = pointer to the VSprite structure to be used as the gel list tail
GInfo = pointer to the GelsInfo structure to be initialized
RESULT
BUGS
SEE ALSO
graphics/gels.h graphics/rastport.h
graphics.library/InitGMasks graphics.library/InitGMasks
NAME
InitGMasks -- Initialize all of the masks of an AnimOb.
SYNOPSIS
InitGMasks(anOb)
A0
void InitGMasks(struct AnimOb *);
FUNCTION
For every sequence of every component call InitMasks.
INPUTS
anOb = pointer to the AnimOb
BUGS
SEE ALSO
InitMasks() graphics/gels.h
graphics.library/InitMasks graphics.library/InitMasks
NAME
InitMasks -- Initialize the BorderLine and CollMask masks of a VSprite.
SYNOPSIS
InitMasks(vs)
A0
void InitMasks(struct VSprite *);
FUNCTION
Creates the appropriate BorderLine and CollMask masks of the VSprite.
Correctly detects if the VSprite is actually a Bob definition, handles
the image data accordingly.
INPUTS
vs = pointer to the VSprite structure
RESULT
BUGS
SEE ALSO
InitGels() graphics/gels.h
graphics.library/InitRastPort graphics.library/InitRastPort
NAME
InitRastPort -- Initialize raster port structure
SYNOPSIS
InitRastPort( rp )
a1
void InitRastPort(struct RastPort *);
FUNCTION
Initialize a RastPort structure to standard values.
INPUTS
rp = pointer to a RastPort structure.
RESULT
all entries in RastPort get zeroed out, with the following exceptions:
Mask, FgPen, AOLPen, and LinePtrn are set to -1.
The DrawMode is set to JAM2
The font is set to the standard system font
NOTES
The struct Rastport describes a control structure
for a write-able raster. The RastPort structure
describes how a complete single playfield display
will be written into. A RastPort structure is
referenced whenever any drawing or filling
operations are to be performed on a section of
memory.
The section of memory which is being used in this
way may or may not be presently a part of the
current actual onscreen display memory. The name
of the actual memory section which is linked to
the RastPort is referred to here as a "raster" or
as a bitmap.
NOTE: Calling the routine InitRastPort only
establishes various defaults. It does NOT
establish where, in memory, the rasters are
located. To do graphics with this RastPort the user
must set up the BitMap pointer in the RastPort.
BUGS
SEE ALSO
graphics/rastport.h
graphics.library/InitTmpRas graphics.library/InitTmpRas
NAME
InitTmpRas -- Initialize area of local memory for usage by
areafill, floodfill, text.
SYNOPSIS
InitTmpRas(tmpras, buffer, size)
a0 a1 d0
void InitTmpRas( struct TmpRas *, void *, ULONG );
FUNCTION
The area of memory pointed to by buffer is set up to be used
by RastPort routines that may need to get some memory for
intermediate operations in preparation to putting the graphics
into the final BitMap.
Tmpras is used to control the usage of buffer.
INPUTS
tmpras - pointer to a TmpRas structure to be linked into
a RastPort
buffer - pointer to a contguous piece of chip memory.
size - size in bytes of buffer
RESULT
makes buffer available for users of RastPort
BUGS
Would be nice if RastPorts could share one TmpRas.
SEE ALSO
AreaEnd() Flood() Text() graphics/rastport.h
graphics.library/InitView graphics.library/InitView
NAME
InitView - Initialize View structure.
SYNOPSIS
InitView( view )
a1
void InitView( struct View * );
FUNCTION
Initialize View structure to default values.
INPUTS
view - pointer to a View structure
RESULT
View structure set to all 0's. (1.0,1.1.1.2)
Then values are put in DxOffset,DyOffset to properly position
default display about .5 inches from top and left on monitor.
InitView pays no attention to previous contents of view.
BUGS
SEE ALSO
MakeVPort graphics/view.h
graphics.library/InitVPort graphics.library/InitVPort
NAME
InitVPort - Initialize ViewPort structure.
SYNOPSIS
InitVPort( vp )
a0
void InitVPort( struct ViewPort * );
FUNCTION
Initialize ViewPort structure to default values.
INPUTS
vp - pointer to a ViewPort structure
RESULT
ViewPort structure set to all 0's. (1.0,1.1)
New field added SpritePriorities, initialized to 0x24 (1.2)
BUGS
SEE ALSO
MakeVPort() graphics/view.h
graphics.library/LoadRGB4 graphics.library/LoadRGB4
NAME
LoadRGB4 -- Load RGB color values from table.
SYNOPSIS
LoadRGB4( vp, colors , count )
a0 a1 d0:16
void LoadRGB4( struct ViewPort *, UWORD *, WORD);
FUNCTION
load the count words of the colormap from table starting at
entry 0.
INPUTS
vp - pointer to ViewPort, whose colors you wish to change
colors - pointer to table of RGB values set up as an array
of USHORTS
background-- 0x0RGB
color1 -- 0x0RGB
color2 -- 0x0RGB
etc. UWORD per value.
The colors are interpreted as 15 = maximum intensity.
0 = minimum intensity.
count = number of UWORDs in the table to load into the
colormap starting at color 0(background) and proceeding
to the next higher color number
RESULTS
The ViewPort should have a pointer to a valid ColorMap to store
the colors in.
Updates the hardware copperlist to reflect the new colors.
Updates the intermediate copperlist with the new colors.
BUGS
NOTE: With V36 and up, it is not safe to call this function
from an interrupt, because of the semaphore locking on graphics
copper lists.
SEE ALSO
SetRGB4() GetRGB4() GetColorMap() graphics/view.h
graphics.library/LoadView graphics.library/LoadView
NAME
LoadView -- Use a (possibly freshly created) coprocessor instruction
list to create the current display.
SYNOPSIS
LoadView( View )
A1
void LoadView( struct View * );
FUNCTION
Install a new view to be displayed during the next display
refresh pass.
Coprocessor instruction list has been created by
InitVPort(), MakeVPort(), and MrgCop().
INPUTS
View - a pointer to the View structure which contains the
pointer to the constructed coprocessor instructions list, or NULL.
RESULT
If the View pointer is non-NULL, the new View is displayed,
according to your instructions. The vertical blank routine
will pick this pointer up and direct the copper to start
displaying this View.
If the View pointer is NULL, no View is displayed.
NOTE
Even though a LoadView(NULL) is performed, display DMA will still be
active. Sprites will continue to be displayed after a LoadView(NULL)
unless an OFF_SPRITE is subsequently performed.
BUGS
SEE ALSO
InitVPort() MakeVPort() MrgCop() intuition/RethinkDisplay()
graphics/view.h
graphics.library/LockLayerRom graphics.library/LockLayerRom
NAME
LockLayerRom -- Lock Layer structure by rom(gfx lib) code.
SYNOPSIS
LockLayerRom( layer )
a5
void LockLayerRom( struct Layer * );
FUNCTION
Return when the layer is locked and no other task may
alter the ClipRect structure in the Layer structure.
This call does not destroy any registers.
This call nests so that callers in this chain will not lock
themselves out.
Do not have the Layer locked during a call to intuition.
There is a potential deadlock problem here, if intuition
needs to get other locks as well.
Having the layer locked prevents other tasks from using the
layer library functions, most notably intuition itself. So
be brief.
layers.library's LockLayer is identical to LockLayerRom.
INPUTS
layer - pointer to Layer structure
RESULTS
The layer is locked and the task can render assuming the
ClipRects will not change out from underneath it until
an UnlockLayerRom is called.
SEE ALSO
UnlockLayerRom() layers.library/LockLayer() graphics/clip.h
graphics.library/MakeVPort graphics.library/MakeVPort
NAME
MakeVPort -- generate display copper list for a viewport.
SYNOPSIS
MakeVPort( view, viewport )
a0 a1
void MakeVPort( struct View *, struct ViewPort * );
FUNCTION
Uses information in the View, ViewPort, ViewPort->RasInfo to
construct and intermediate copper list for this ViewPort.
INPUTS
view - pointer to a View structure
viewport - pointer to a ViewPort structure
The viewport must have valid pointer to a RasInfo.
RESULTS
constructs intermediate copper list and puts pointers in
viewport.DspIns
If the ColorMap ptr in ViewPort is NULL then it uses colors
from the default color table.
If DUALPF in Modes then there must be a second RasInfo pointed
to by the first RasInfo
BUGS
Narrow Viewports (whose righthand edge is less than 3/4 of the
way across the display) still do not work properly.
SEE ALSO
InitVPort() MrgCop() graphics/view.h intuition.library/MakeScreen()
intuition.library/RemakeDisplay() intuition.library/RethinkDisplay()
graphics.library/ModeNotAvailable graphics.library/ModeNotAvailable
NAME
ModeNotAvailable -- check to see if a DisplayID isn't available. (V36)
SYNOPSIS
error = ModeNotAvailable( modeID )
d0 d0
ULONG ModeNotAvailable( ULONG);
FUNCTION
returns an error code, indicating why this modeID is not available,
or NULL if there is no reason known why this mode should not be there.
INPUTS
modeID -- a 32 bit DisplayInfoRecord identifier.
RESULT
error -- a general indication of why this modeID is not available,
or NULL if there is no reason why it shouldn't be available.
NOTE
ULONG return values from this function are a proper superset of the
DisplayInfo.NotAvailable field (defined in graphics/displayinfo.h).
BUGS
SEE ALSO
graphics/displayinfo.h, GetVPModeID()
graphics.library/Move graphics.library/Move
NAME
Move -- Move graphics pen position.
SYNOPSIS
Move( rp, x, y)
a1 d0:16 d1:16
void Move( struct RastPort *, SHORT, SHORT );
FUNCTION
Move graphics pen position to (x,y) relative to upper left (0,0)
of RastPort. This sets the starting point for subsequent Draw()
and Text() calls.
INPUTS
rp - pointer to a RastPort structure
x,y - point in the RastPort
RESULTS
BUGS
SEE ALSO
Draw graphics/rastport.h
graphics.library/MoveSprite graphics.library/MoveSprite
NAME
MoveSprite -- Move sprite to a point relative to top of viewport.
SYNOPSIS
MoveSprite(vp, sprite, x, y)
A0 A1 D0 D1
void MoveSprite(struct ViewPort *,struct SimpleSprite *, WORD, WORD);
FUNCTION
Move sprite image to new place on display.
INPUTS
vp - pointer to ViewPort structure
if vp = 0, sprite is positioned relative to View.
sprite - pointer to SimpleSprite structure
(x,y) - new position relative to top of viewport or view.
RESULTS
Calculate the hardware information for the sprite and
place it in the posctldata array. During next video display
the sprite will appear in new position.
BUGS
Sprites really appear one pixel to the left of the position you specify.
This bug affects the apparent display position of the sprite on the
screen, but does not affect the numeric position relative to the
viewport or view.
SEE ALSO
FreeSprite() ChangeSprite() GetSprite() graphics/sprite.h
graphics.library/MrgCop graphics.library/MrgCop
NAME
MrgCop -- Merge together coprocessor instructions.
SYNOPSIS
MrgCop( View )
A1
void MrgCop( struct View * );
FUNCTION
Merge together the display, color, sprite and user coprocessor
instructions into a single coprocessor instruction stream. This
essentially creates a per-display-frame program for the coprocessor.
This function MrgCop is used, for example, by the graphics animation
routines which effectively add information into an essentially
static background display. This changes some of the user
or sprite instructions, but not those which have formed the
basic display in the first place. When all forms of coprocessor
instructions are merged together, you will have a complete per-
frame instruction list for the coprocessor.
Restrictions: Each of the coprocessor instruction lists MUST be
internally sorted in min to max Y-X order. The merge routines
depend on this! Each list must be terminated using CEND(copperlist).
INPUTS
View - a pointer to the view structure whose coprocessor
instructions are to be merged.
RESULT
The view structure will now contain a complete, sorted/merged
list of instructions for the coprocessor, ready to be used by
the display processor. The display processor is told to use
this new instruction stream through the instruction LoadView().
BUGS
SEE ALSO
InitVPort() MakeVPort() LoadView() graphics/view.h
intuition.library/RethinkDisplay()
graphics.library/NewRegion graphics.library/NewRegion
NAME
NewRegion -- Get an empty region.
SYNOPSIS
region = NewRegion()
d0
struct Region *NewRegion();
FUNCTION
Create a Region structure, initialize it to empty, and return
a pointer it.
RESULTS
region - pointer to initialized region. If it could not allocate
required memory region = NULL.
INPUTS
none
BUGS
SEE ALSO
graphics/regions.h
graphics.library/NextDisplayInfo graphics.library/NextDisplayInfo
NAME
NextDisplayInfo -- iterate current displayinfo identifiers (V36)
SYNOPSIS
next_ID = NextDisplayInfo(last_ID)
D0 D0
ULONG NextDisplayInfo(ULONG);
FUNCTION
The basic iteration function with which to find all records in the
graphics database. Using each ID in succession, you can then call
FindDisplayInfo() to obtain the handle associated with each ID.
Each ID is a 32-bit Key which uniquely identifies one record.
The INVALID_ID is special, and indicates the end-of-list.
INPUTS
last_ID - previous displayinfo identifier
or INVALID_ID if beginning iteration.
RESULT
next_ID - subsequent displayinfo identifier
or INVALID_ID if no more records.
BUGS
SEE ALSO
FindDisplayInfo(), GetDisplayInfoData()
graphics/displayinfo.h
graphics.library/OpenFont graphics.library/OpenFont
NAME
OpenFont -- Get a pointer to a system font.
SYNOPSIS
font = OpenFont(textAttr)
D0 A0
struct TextFont *OpenFont(struct TextAttr *);
FUNCTION
This function searches the system font space for the graphics
text font that best matches the attributes specified. The
pointer to the font returned can be used in subsequent
SetFont and CloseFont calls. It is important to match this
call with a corresponding CloseFont call for effective
management of ram fonts.
INPUTS
textAttr - a TextAttr or TTextAttr structure that describes the
text font attributes desired.
RESULT
font is zero if the desired font cannot be found. If the named
font is found, but the size and style specified are not
available, a font with the nearest attributes is returned.
SEE ALSO
CloseFont() SetFont()
diskfont.library/OpenDiskFont graphics/text.h
graphics.library/OpenMonitor graphics.library/OpenMonitor
NAME
OpenMonitor -- open a named MonitorSpec (V36)
SYNOPSIS
mspc = OpenMonitor( monitor_name , display_id)
d0 a1 d0
struct MonitorSpec *OpenMonitor( char *, ULONG );
FUNCTION
Locate and open a named MonitorSpec.
INPUTS
monitor_name - a pointer to a null terminated string.
display_id - an optional 32 bit monitor/mode identifier
RESULTS
mspc - a pointer to an open MonitorSpec structure.
NULL if MonitorSpec could not be opened.
NOTE
if monitor_name is non-NULL, the monitor will be opened by name.
if monitor_name is NULL the monitor will be opened by optional ID.
if both monitor_name and display_id are NULL returns default monitor.
BUGS
SEE ALSO
CloseMonitor() graphics/monitor.h
graphics.library/OrRectRegion graphics.library/OrRectRegion
NAME
OrRectRegion -- Perform 2d OR operation of rectangle
with region, leaving result in region.
SYNOPSIS
status = OrRectRegion(region,rectangle)
d0 a0 a1
BOOL OrRectRegion( struct Region *, struct Rectangle * );
FUNCTION
If any portion of rectangle is not in the region then add
that portion to the region.
INPUTS
region - pointer to Region structure
rectangle - pointer to Rectangle structure
RESULTS
status - return TRUE if successful operation
return FALSE if ran out of memory
BUGS
SEE ALSO
AndRectRegion() OrRegionRegion() graphics/regions.h
graphics.library/OrRegionRegion graphics.library/OrRegionRegion
NAME
OrRegionRegion -- Perform 2d OR operation of one region
with second region, leaving result in second region
SYNOPSIS
status = OrRegionRegion(region1,region2)
d0 a0 a1
BOOL OrRegionRegion( struct Region *, struct Region * );
FUNCTION
If any portion of region1 is not in the region then add
that portion to the region2
INPUTS
region1 - pointer to Region structure
region2 - pointer to Region structure
RESULTS
status - return TRUE if successful operation
return FALSE if ran out of memory
BUGS
SEE ALSO
OrRectRegion() graphics/regions.h
graphics.library/OwnBlitter graphics.library/OwnBlitter
NAME
OwnBlitter -- get the blitter for private usage
SYNOPSIS
OwnBlitter()
void OwnBlitter( void );
FUNCTION
If blitter is available return immediately with the blitter
locked for your exclusive use. If the blitter is not available
put task to sleep. It will be awakened as soon as the blitter
is available. When the task first owns the blitter the blitter
may still be finishing up a blit for the previous owner. You
must do a WaitBlit before actually using the blitter registers.
Calls to OwnBlitter() do not nest. If a task that owns the
blitter calls OwnBlitter() again, a lockup will result.
(Same situation if the task calls a system function
that tries to own the blitter).
INPUTS
NONE
RETURNS
NONE
SEE ALSO
DisownBlitter() WaitBlit()
graphics.library/PolyDraw graphics.library/PolyDraw
NAME
PolyDraw -- Draw lines from table of (x,y) values.
SYNOPSIS
PolyDraw( rp, count , array )
a1 d0 a0
void PolyDraw( struct RastPort *, WORD, WORD * );
FUNCTION
starting with the first pair in the array, draw connected lines to
it and every successive pair.
INPUTS
rp - pointer to RastPort structure
count - number of (x,y) pairs in the array
array - pointer to first (x,y) pair
BUGS
SEE ALSO
Draw() Move() graphics/rastport.h
graphics.library/QBlit graphics.library/QBlit
NAME
QBlit -- Queue up a request for blitter usage
SYNOPSIS
QBlit( bp )
a1
void QBlit( struct bltnode * );
FUNCTION
Link a request for the use of the blitter to the end of the
current blitter queue. The pointer bp points to a blit structure
containing, among other things, the link information, and the
address of your routine which is to be called when the blitter
queue finally gets around to this specific request. When your
routine is called, you are in control of the blitter ... it is
not busy with anyone else's requests. This means that you can
directly specify the register contents and start the blitter.
See the description of the blit structure and the uses of QBlit
in the section titled Graphics Support in the OS Kernel Manual.
Your code must be written to run either in supervisor or user
mode on the 68000.
INPUTS
bp - pointer to a blit structure
RESULT
Your routine is called when the blitter is ready for you.
In general requests for blitter usage through this channel are
put in front of those who use the blitter via OwnBlitter and
DisownBlitter. However for small blits there is more overhead
using the queuer than Own/Disown Blitter.
BUGS
SEE ALSO
QBSBlit() hardware/blit.h
graphics.library/QBSBlit graphics.library/QBSBlit
NAME
QBSBlit -- Synchronize the blitter request with the video beam.
SYNOPSIS
QBSBlit( bsp )
a1
void QBSBlit( struct bltnode * );
FUNCTION
Call a user routine for use of the blitter, enqueued separately from
the QBlit queue. Calls the user routine contained in the blit
structure when the video beam is located at a specified position
onscreen. Useful when you are trying to blit into a visible part
of the screen and wish to perform the data move while the beam is
not trying to display that same area. (prevents showing part of
an old display and part of a new display simultaneously). Blitter
requests on the QBSBlit queue take precedence over those on the
regular blitter queue. The beam position is specified the blitnode.
INPUTS
bsp - pointer to a blit structure. See description in the
Graphics Support section of the manual for more info.
RESULT
User routine is called when the QBSBlit queue reaches this
request AND the video beam is in the specified position.
If there are lots of blits going on and the video beam
has wrapped around back to the top it will call all the
remaining bltnodes as fast as it can to try and catch up.
BUGS
Not very smart when getting blits from different tasks.
They all get put in same queue so there are unfortunately
some interdependencies with the beam syncing.
SEE ALSO
QBlit() hardware/blit.h
graphics.library/ReadPixel graphics.library/ReadPixel
NAME
ReadPixel -- read the pen number value of the pixel at a
specified x,y location within a certain RastPort.
SYNOPSIS
penno = ReadPixel( rp, x, y )
d0 a1 d0:16 d1:16
LONG ReadPixel( struct RastPort *, SHORT, SHORT );
FUNCTION
Combine the bits from each of the bit-planes used to describe
a particular RastPort into the pen number selector which that
bit combination normally forms for the system hardware selection
of pixel color.
INPUTS
rp - pointer to a RastPort structure
(x,y) a point in the RastPort
RESULT
penno - the pen number of the pixel at (x,y) is returned.
-1 is returned if the pixel cannot be read for some reason.
BUGS
SEE ALSO
WritePixel() graphics/rastport.h
graphics.library/ReadPixelArray8 graphics.library/ReadPixelArray8
NAME
ReadPixelArray8 -- read the pen number value of a rectangular array
of pixels starting at a specified x,y location and continuing
through to another x,y location within a certain RastPort. (V36)
SYNOPSIS
count = ReadPixelArray8(rp,xstart,ystart,xstop,ystop,array,temprp)
D0 A0 D0:16 D1:16 D2:16 D3:16 A2 A1
LONG ReadPixelArray8(struct RastPort *, UWORD, UWORD, UWORD, UWORD,
UBYTE *, struct RastPort *);
FUNCTION
For each pixel in a rectangular region, combine the bits from each
of the bit-planes used to describe a particular RastPort into the pen
number selector which that bit combination normally forms for the
system hardware selection of pixel color.
INPUTS
rp - pointer to a RastPort structure
(xstart,ystart) - starting point in the RastPort
(xstop,ystop) - stopping point in the RastPort
array - pointer to an array of ubytes from which to fetch the pixel data
allocate at least ((((width+15)>>4)<<4)*(ystop-ystart+1)) bytes.
temprp - temporary rastport (copy of rp with Layer set == NULL,
temporary memory allocated for
temprp->BitMap with Rows set == 1,
temprp->BytesPerRow == (((width+15)>>4)<<1),
and temporary memory allocated for
temprp->BitMap->Planes[])
RESULT
For each pixel in the array:
Pen - (0..255) number at that position is returned
count - the number of pixels read.
NOTE
xstop must be >= xstart
ystop must be >= ystart
BUGS
SEE ALSO
ReadPixel() ReadPixelLine8() graphics/rastport.h
graphics.library/ReadPixelLine8 graphics.library/ReadPixelLine8
NAME
ReadPixelLine8 -- read the pen number value of a horizontal line
of pixels starting at a specified x,y location and continuing
right for count pixels. (V36)
SYNOPSIS
count = ReadPixelLine8(rp,xstart,ystart,width,array,temprp)
D0 A0 D0:16 D1:16 D2 A2 A1
LONG ReadPixelLine8(struct RastPort *, UWORD, UWORD, UWORD,
UBYTE *, struct RastPort * );
FUNCTION
For each pixel in a rectangular region, combine the bits from each
of the bit-planes used to describe a particular RastPort into the pen
number selector which that bit combination normally forms for the
system hardware selection of pixel color.
INPUTS
rp - pointer to a RastPort structure
(x,y) - a point in the RastPort
width - count of horizontal pixels to read
array - pointer to an array of UBYTEs from which to fetch the pixel data
allocate at least (((width+15)>>4)<<4) bytes.
temprp - temporary rastport (copy of rp with Layer set == NULL,
temporary memory allocated for
temprp->BitMap with Rows set == 1,
temprp->BytesPerRow == (((width+15)>>4)<<1),
and temporary memory allocated for
temprp->BitMap->Planes[])
RESULT
For each pixel in the array:
Pen - (0..255) number at that position is returned
count - the number of pixels read.
NOTE
width must be non negative
BUGS
SEE ALSO
ReadPixel() graphics/rastport.h
graphics.library/RectFill graphics.library/RectFill
NAME
RectFill -- Fill a rectangular region in a RastPort.
SYNOPSIS
RectFill( rp, xmin, ymin, xmax, ymax)
a1 d0:16 d1:16 d2:16 d3:16
void RectFill( struct RastPort *, SHORT, SHORT, SHORT, SHORT );
FUNCTION
Fills the rectangular region specified by the
parameters with the chosen pen colors, areafill
pattern, and drawing mode. If no areafill pattern is
specified, fill the rectangular region with the FgPen
color, taking into account the drawing mode.
INPUTS
rp - pointer to a RastPort structure
(xmin,ymin) (xmax,ymax) are the coordinates of the upper
left corner and the lower right corner, respectively, of the
rectangle.
NOTE
The following relation MUST be true:
(xmax >= xmin) and (ymax >= ymin)
BUGS
Complement mode with FgPen complements all bitplanes.
SEE ALSO
AreaEnd() graphics/rastport.h
graphics.library/RemBob graphics.library/RemBob
NAME
RemBob -- Macro to remove a Bob from the gel list.
SYNOPSIS
RemBob(bob)
RemBob(struct Bob *);
FUNCTION
Marks a Bob as no-longer-required. The gels internal code then
removes the Bob from the list of active gels the next time
DrawGList is executed. This is implemented as a macro.
If the user is double-buffering the Bob, it could take two
calls to DrawGList before the Bob actually disappears from
the RastPort.
INPUTS
Bob = pointer to the Bob to be removed
RESULT
BUGS
SEE ALSO
RemIBob() DrawGList() graphics/gels.h graphics/gfxmacros.h
graphics.library/RemFont graphics.library/RemFont
NAME
RemFont -- Remove a font from the system list.
SYNOPSIS
RemFont(textFont)
A1
void RemFont(struct TextFont *);
FUNCTION
This function removes a font from the system, ensuring that
access to it is restricted to those applications that
currently have an active pointer to it: i.e. no new SetFont
requests to this font are satisfied.
INPUTS
textFont - the TextFont structure to remove.
RESULT
BUGS
SEE ALSO
SetFont() AddFont() graphics/text.h
graphics.library/RemIBob graphics.library/RemIBob
NAME
RemIBob -- Immediately remove a Bob from the gel list and the RastPort.
SYNOPSIS
RemIBob(bob, rp, vp)
A0 A1 A2
void RemIBob(struct Bob *, struct RastPort *, struct ViewPort *);
FUNCTION
Removes a Bob immediately by uncoupling it from the gel list and
erases it from the RastPort.
INPUTS
bob = pointer to the Bob to be removed
rp = pointer to the RastPort if the Bob is to be erased
vp = pointer to the ViewPort for beam-synchronizing
RESULT
BUGS
SEE ALSO
InitGels() RemVSprite() graphics/gels.h
graphics.library/RemVSprite graphics.library/RemVSprite
NAME
RemVSprite -- Remove a VSprite from the current gel list.
SYNOPSIS
RemVSprite(vs)
A0
void RemVSprite(struct VSprite *);
FUNCTION
Unlinks the VSprite from the current gel list.
INPUTS
vs = pointer to the VSprite structure to be removed from the gel list
RESULT
BUGS
SEE ALSO
InitGels() RemIBob() graphics/gels.h
graphics.library/ScalerDiv graphics.library/ScalerDiv
NAME
ScalerDiv -- Get the scaling result that BitMapScale would. (V36)
SYNOPSIS
result = ScalerDiv(factor, numerator, denominator)
D0 D0 D1 D2
UWORD ScalerDiv(UWORD, UWORD, UWORD);
FUNCTION
Calculate the expression (factor*numerator/denominator) such
that the result is the same as the width of the destination
result of BitMapScale when the factor here is the width of
the source, and the numerator and denominator are the
XDestFactor and XSrcFactor for BitMapScale.
INPUTS
factor - a number in the range 0..16383
numerator, denominator - numbers in the range 1..16383
RESULT
this returns factor*numerator/denominator
graphics.library/ScrollRaster graphics.library/ScrollRaster
NAME
ScrollRaster -- Push bits in rectangle in raster around by
dx,dy towards 0,0 inside rectangle.
SYNOPSIS
ScrollRaster(rp, dx, dy, xmin, ymin, xmax, ymax)
A1 D0 D1 D2 D3 D4 D5
void ScrollRaster
(struct RastPort *, WORD, WORD, WORD, WORD, WORD, WORD);
FUNCTION
Move the bits in the raster by (dx,dy) towards (0,0)
The space vacated is RectFilled with BGPen.
Limit the scroll operation to the rectangle defined
by (xmin,ymin)(xmax,ymax). Bits outside will not be
affected. If xmax,ymax is outside the rastport then use
the lower right corner of the rastport.
If you are dealing with a SimpleRefresh layered RastPort you
should check rp->Layer->Flags & LAYER_REFRESH to see if
there is any damage in the damage list. If there is you should
call the appropriate BeginRefresh(Intuition) or BeginUpdate(graphics)
routine sequence.
INPUTS
rp - pointer to a RastPort structure
dx,dy are integers that may be postive, zero, or negative
xmin,ymin - upper left of bounding rectangle
xmax,ymax - lower right of bounding rectangle
EXAMPLE
ScrollRaster(rp,0,1) /* shift raster up by one row */
ScrollRaster(rp,-1,-1) /* shift raster down and to the right by 1 pixel
BUGS
In 1.2/V1.3 if you ScrollRaster a SUPERBITMAP exactly left or
right, and there is no TmpRas attached to the RastPort, the system
will allocate one for you, but will never free it or record its
location. This bug has been fixed for V1.4. The workaround for
1.2/1.3 is to attach a valid TmpRas of size at least
MAXBYTESPERROW to the RastPort before the call.
Begining with V1.4 ScrollRaster adds the shifted areas into the
damage list for SIMPLE_REFRESH windows. Due to unacceptable
system overhead, the decision was made NOT to propagate this
shifted area damage for SMART_REFRESH windows.
SEE ALSO
graphics/rastport.h
graphics.library/ScrollVPort graphics.library/ScrollVPort
NAME
ScrollVPort -- Reinterpret RasInfo information in ViewPort to reflect
the current Offset values.
SYNOPSIS
ScrollVPort( vp )
a0
void ScrollVPort(struct ViewPort *);
FUNCTION
After the programmer has adjusted the Offset values in
the RasInfo structures of ViewPort, change the
the copper lists to reflect the the Scroll positions.
Changing the BitMap ptr in RasInfo and not changing the
the Offsets will effect a double buffering affect.
INPUTS
vp - pointer to a ViewPort structure
that is currently be displayed.
RESULTS
modifies hardware and intermediate copperlists to reflect
new RasInfo
BUGS
pokes not fast enough to avoid some visible hashing of display
SEE ALSO
MakeVPort() MrgCop() LoadView() graphics/view.h
graphics.library/SetAPen graphics.library/SetAPen
NAME
SetAPen -- Set the primary pen for a RastPort.
SYNOPSIS
SetAPen( rp, pen )
a1 d0
void SetAPen( struct RastPort *, UBYTE );
FUNCTION
Set the primary drawing pen for lines, fills, and text.
INPUTS
rp - pointer to RastPort structure.
pen - (0-255)
RESULT
Changes the minterms in the RastPort to reflect new primary pen.
Sets line drawer to restart pattern.
BUGS
SEE ALSO
SetBPen() graphics/rastport.h
graphics.library/SetBPen graphics.library/SetBPen
NAME
SetBPen -- Set secondary pen for a RastPort
SYNOPSIS
SetBPen( rp, pen )
a1 d0
void SetBPen( struct RastPort *, UBYTE );
FUNCTION
Set the secondary drawing pen for lines, fills, and text.
INPUTS
rp - pointer to RastPort structure.
pen - (0-255)
RESULT
Changes the minterms in the RastPort to reflect new secondary pen.
Sets line drawer to restart pattern.
BUGS
SEE ALSO
SetAPen() graphics/rastport.h
graphics.library/SetCollision graphics.library/SetCollision
NAME
SetCollision -- Set a pointer to a user collision routine.
SYNOPSIS
SetCollision(num, routine, GInfo)
D0 A0 A1
void SetCollision(ULONG, VOID (*)(), struct GelsInfo *);
FUNCTION
Sets a specified entry (num) in the user's collision vectors table
equal to the address of the specified collision routine.
INPUTS
num = collision vector number
routine = pointer to the user's collision routine
GInfo = pointer to a GelsInfo structure
RESULT
BUGS
SEE ALSO
InitGels() graphics/gels.h graphics/rastport.h
graphics.library/SetDrMd graphics.library/SetDrMd
NAME
SetDrMd -- Set drawing mode for a RastPort
SYNOPSIS
SetDrMd( rp, mode )
a1 d0:8
void SetDrMd( struct RastPort *, UBYTE );
FUNCTION
Set the drawing mode for lines, fills and text.
Get the bit definitions from rastport.h
INPUTS
rp - pointer to RastPort structure.
mode - 0-255, some combinations may not make much sense.
RESULT
The mode set is dependant on the bits selected.
Changes minterms to reflect new drawing mode.
Sets line drawer to restart pattern.
BUGS
SEE ALSO
SetAPen() SetBPen() graphics/rastport.h
graphics.library/SetFont graphics.library/SetFont
NAME
SetFont -- Set the text font and attributes in a RastPort.
SYNOPSIS
SetFont(rp, font)
A1 A0
void SetFont(struct RastPort *, struct TextFont *);
FUNCTION
This function sets the font in the RastPort to that described
by font, and updates the text attributes to reflect that
change. This function clears the effect of any previous
soft styles.
INPUTS
rp - the RastPort in which the text attributes are to be changed
font - pointer to a TextFont structure returned from OpenFont()
or OpenDiskFont()
RESULT
NOTES
This function had previously been documented that it would
accept a null font. This practice is discouraged.
o Use of a RastPort with a null font with text routines has
always been incorrect and risked the guru.
o Keeping an obsolete font pointer in the RastPort is no more
dangerous than keeping a zero one there.
o SetFont(rp, 0) causes spurious low memory accesses under
some system software releases.
As of V36, the following Amiga font variants are no longer
directly supported:
fonts with NULL tf_CharSpace and non-NULL tf_CharKern.
fonts with non-NULL tf_CharSpace and NULL tf_CharKern.
fonts with NULL tf_CharSpace and NULL tf_CharKern with
a tf_CharLoc size component greater than tf_XSize.
Attempts to SetFont these one of these font variants will
cause the system to modify your font to make it acceptable.
BUGS
Calling SetFont() on in-code TextFonts (ie fonts not
OpenFont()ed) will result in a loss of 24 bytes from
the system as of V36.
This can be resolved by calling StripFont().
SEE ALSO
OpenFont() StripFont()
diskfont.library/OpenDiskFont() graphics/text.h
graphics.library/SetOPen graphics.library/SetOPen
NAME
SetOPen -- Change the Area OutLine pen and turn on Outline
mode for areafills.
SYNOPSIS
SetOPen(rp, pen)
void SetOPen( struct RastPort *, UBYTE );
FUNCTION
This is implemented as a c-macro.
Pen is the pen number that will be used to draw a border
around an areafill during AreaEnd().
INPUTS
rp = pointer to RastPort structure
pen = number between 0-255
BUGS
SEE ALSO
AreaEnd() graphics/gfxmacros.h graphics/rastport.h
graphics.library/SetRast graphics.library/SetRast
NAME
SetRast - Set an entire drawing area to a specified color.
SYNOPSIS
SetRast( rp, pen )
a1 d0
void SetRast( struct RastPort *, UBYTE );
FUNCTION
Set the entire contents of the specified RastPort to the
specified pen.
INPUTS
rp - pointer to RastPort structure
pen - the pen number (0-255) to jam into bitmap
RESULT
All pixels within the drawing area are set to the
selected pen number.
BUGS
SEE ALSO
RectFill() graphics/rastport.h
graphics.library/SetRGB4 graphics.library/SetRGB4
NAME
SetRGB4 -- Set one color register for this viewport.
SYNOPSIS
SetRGB4( vp, n, r, g, b)
a0 d0 d1:4 d2:4 d3:4
void SetRGB4( struct ViewPort *, SHORT, UBYTE, UBYTE, UBYTE );
FUNCTION
Change the color look up table so that this viewport displays
the color (r,g,b) for pen number n.
INPUTS
vp - pointer to viewport structure
n - the color number (range from 0 to 31)
r - red level (0-15)
g - green level (0-15)
b - blue level (0-15)
RESULT
If there is a ColorMap for this viewport, then the value will
be stored in the ColorMap.
The selected color register is changed to match your specs.
If the color value is unused then nothing will happen.
BUGS
NOTE: Under V36 and up, it is not safe to call this function
from an interrupt, due to semaphore protection of graphics
copper lists.
SEE ALSO
LoadRGB4() GetRGB4() graphics/view.h
graphics.library/SetRGB4CM graphics.library/SetRGB4CM
NAME
SetRGB4CM -- Set one color register for this ColorMap.
SYNOPSIS
SetRGB4CM( cm, n, r, g, b)
a0 d0 d1:4 d2:4 d3:4
void SetRGB4CM( struct ColorMap *, SHORT, UBYTE, UBYTE, UBYTE );
INPUTS
cm = colormap
n = the number of the color register to set. Ranges from 0 to 31
on current amiga displays.
r = red level (0-15)
g = green level (0-15)
b = blue level (0-15)
RESULT
Store the (r,g,b) triplet at index n of the ColorMap structure.
This function can be used to set up a ColorMap before before
linking it into a viewport.
BUGS
SEE ALSO
GetColorMap() GetRGB4() SetRGB4() graphics/view.h
graphics.library/SetSoftStyle graphics.library/SetSoftStyle
NAME
SetSoftStyle -- Set the soft style of the current font.
SYNOPSIS
newStyle = SetSoftStyle(rp, style, enable)
D0 A1 D0 D1
ULONG SetSoftStyle(struct RastPort *, ULONG, ULONG);
FUNCTION
This function alters the soft style of the current font. Only
those bits that are also set in enable are affected. The
resulting style is returned, since some style request changes
will not be honored when the implicit style of the font
precludes changing them.
INPUTS
rp - the RastPort from which the font and style
are extracted.
style - the new font style to set, subject to enable.
enable - those bits in style to be changed. Any set bits here
that would not be set as a result of AskSoftStyle will
be ignored, and the newStyle result will not be as
expected.
RESULTS
newStyle - the resulting style, both as a result of previous
soft style selection, the effect of this function,
and the style inherent in the set font.
BUGS
SEE ALSO
AskSoftStyle() graphics/text.h
graphics.library/SortGList graphics.library/SortGList
NAME
SortGList -- Sort the current gel list, ordering its y,x coordinates.
SYNOPSIS
SortGList(rp)
A1
void SortGList(struct RastPort *);
FUNCTION
Sorts the current gel list according to the gels' y,x coordinates.
This sorting is essential before calls to DrawGList or DoCollision.
INPUTS
rp = pointer to the RastPort structure containing the GelsInfo
RESULT
BUGS
SEE ALSO
InitGels() DoCollision() DrawGList() graphics/rastport.h
graphics.library/StripFont graphics.library/StripFont
NAME
StripFont -- remove the tf_Extension from a font (V36)
SYNOPSIS
StripFont(font)
A0
VOID StripFont(struct TextFont *);
graphics.library/SyncSBitMap graphics.library/SyncSBitMap
NAME
SyncSBitMap -- Syncronize Super BitMap with whatever is
in the standard Layer bounds.
SYNOPSIS
SyncSBitMap( layer )
a0
void SyncSBitMap( struct Layer * );
FUNCTION
Copy all bits from ClipRects in Layer into Super BitMap
BitMap. This is used for those functions that do not
want to deal with the ClipRect structures but do want
to be able to work with a SuperBitMap Layer.
INPUTS
layer - pointer to a Layer that has a SuperBitMap
The Layer should already be locked by the caller.
RESULT
After calling this function, the programmer can manipulate
the bits in the superbitmap associated with the layer.
Afterwards, the programmer should call CopySBitMap to
copy the bits back into the onscreen layer.
BUGS
SEE ALSO
CopySBitMap() graphics/clip.h
graphics.library/Text graphics.library/Text
NAME
Text -- Write text characters (no formatting).
SYNOPSIS
Text(rp, string, length)
A1 A0 D0-0:16
void Text(struct RastPort *, STRPTR, WORD);
FUNCTION
This graphics function writes printable text characters to the
specified RastPort at the current position. No control meaning
is applied to any of the characters, thus only text on the
current line is output.
The current position in the RastPort is updated to the next
character position.
If the characters displayed run past the RastPort boundary,
the current position is truncated to the boundary, and
thus does not equal the old position plus the text length.
INPUTS
rp - a pointer to the RastPort which describes where the
text is to be output
string - the address of string to output
length - the number of characters in the string.
If zero, there are no characters to be output.
NOTES
o This function may use the blitter.
o Changing the text direction with RastPort->TxSpacing is
not supported.
BUGS
For V34 and earlier:
o The maximum string length (in pixels) is limited to
(1024 - 16 = 1008) pixels wide.
o A text string whose last character(s) have a
tf_CharLoc size component that extends to the right of
the rightmost of the initial and final CP positions
will be (inappropriately) clipped.
SEE ALSO
Move() TextLength() graphics/text.h graphics/rastport.h
graphics.library/TextExtent graphics.library/TextExtent
NAME
TextExtent -- Determine raster extent of text data. (V36)
SYNOPSIS
TextExtent(rp, string, count, textExtent)
A1 A0 D0:16 A2
void TextExtent(struct RastPort *, STRPTR, WORD,
struct TextExtent *);
FUNCTION
This function determines a more complete metric of the space
that a text string would render into than the TextLength()
function.
INPUTS
rp - a pointer to the RastPort which describes where the
text attributes reside.
string - the address of the string to determine the length of.
count - the number of characters in the string.
If zero, there are no characters in the string.
textExtent - a structure to hold the result.
RESULTS
textExtent is filled in as follows:
te_Width - same as TextLength() result: the rp_cp_x
advance that rendering this text would cause.
te_Height - same as tf_YSize. The height of the
font.
te_Extent.MinX - the offset to the left side of the
rectangle this would render into. Often zero.
te_Extent.MinY - same as -tf_Baseline. The offset
from the baseline to the top of the rectangle
this would render into.
te_Extent.MaxX - the offset of the left side of the
rectangle this would render into. Often the
same as te_Width-1.
te_Extent.MaxY - same as tf_YSize-tf_Baseline-1.
The offset from the baseline to the bottom of
the rectanangle this would render into.
SEE ALSO
TextLength() Text() TextFit()
graphics/text.h graphics/rastport.h
graphics.library/TextFit graphics.library/TextFit
NAME
TextFit - count characters that will fit in a given extent (V36)
SYNOPSIS
chars = TextFit(rastport, string, strLen, textExtent,
D0 A1 A0 D0 A2
constrainingExtent, strDirection,
A3 D1
constrainingBitWidth, constrainingBitHeight)
D2 D3
ULONG TextFit(struct RastPort *, STRPTR, UWORD,
struct TextExtent *, struct TextExtent *, WORD, UWORD, UWORD);
FUNCTION
This function determines how many of the characters of the
provided string will fit into the space described by the
constraining parameters. It also returns the extent of
that number of characters.
INPUTS
rp - a pointer to the RastPort which describes where the
text attributes reside.
string - the address of string to determine the constraint of
strLen - The number of characters in the string.
If zero, there are no characters in the string.
textExtent - a structure to hold the extent result.
constrainingExtent - the extent that the text must fit in.
This can be NULL, indicating only the constrainingBit
dimensions will describe the constraint.
strDirection - the offset to add to the string pointer to
get to the next character in the string. Usually 1.
Set to -1 and the string to the end of the string to
perform a TextFit() anchored at the end. No other value
is valid.
constrainingBitWidth - an alternative way to specify the
rendering box constraint width that is independent of
the rendering origin. Range 0..32767.
constrainingBitHeight - an alternative way to specify the
rendering box constraint height that is independent of
the rendering origin. Range 0..32767.
RESULTS
chars - the number of characters from the origin of the
given string that will fit in both the constraining
extent (which specifies a CP bound and a rendering
box relative to the origin) and in the rendering width
and height specified.
NOTES
The result is zero chars and an empty textExtent when the fit
cannot be performed. This occurs not only when no text will
fit in the provided constraints, but also when:
- the RastPort rp's rp_TxSpacing sign and magnitude is so
great it reverses the path of the text.
- the constrainingExtent does not include x = 0.
SEE ALSO
TextExtent() TextLength() Text()
graphics/text.h graphics/rastport.h
graphics.library/TextLength graphics.library/TextLength
NAME
TextLength -- Determine raster length of text data.
SYNOPSIS
length = TextLength(rp, string, count)
D0 A1 A0 D0:16
WORD TextLength(struct RastPort *, STRPTR, WORD);
FUNCTION
This graphics function determines the length that text data
would occupy if output to the specified RastPort with the
current attributes. The length is specified as the number of
raster dots: to determine what the current position would be
after a Write() using this string, add the length to cp_x
(cp_y is unchanged by Write()). Use the newer TextExtent() to
get more information.
INPUTS
rp - a pointer to the RastPort which describes where the
text attributes reside.
string - the address of string to determine the length of
count - the string length. If zero, there are no characters
in the string.
RESULTS
length - the number of pixels in x this text would occupy, not
including any negative kerning that may take place at
the beginning of the text string, nor taking into
account the effects of any clipping that may take
place.
NOTES
Prior to V36, the result length occupied only the low word of
d0 and was not sign extended into the high word.
BUGS
A length that would overflow single word arithmatic is not
calculated correctly.
SEE ALSO
TextExtent() Text() TextFit()
graphics/text.h graphics/rastport.h
graphics.library/UnlockLayerRom graphics.library/UnlockLayerRom
NAME
UnlockLayerRom -- Unlock Layer structure by rom(gfx lib) code.
SYNOPSIS
UnlockLayerRom( layer )
a5
void UnlockLayerRom( struct Layer * );
FUNCTION
Release the lock on this layer. If the same task has called
LockLayerRom more than once than the same number of calls to
UnlockLayerRom must happen before the layer is actually freed
so that other tasks may use it.
This call does destroy scratch registers.
This call is identical to UnlockLayer (layers.library).
INPUTS
layer - pointer to Layer structure
BUGS
SEE ALSO
LockLayerRom() layers.library/UnlockLayer() graphics/clip.h
graphics.library/VBeamPos graphics.library/VBeamPos
NAME
VBeamPos -- Get vertical beam position at this instant.
SYNOPSIS
pos = VBeamPos()
d0
LONG VBeamPos( void );
FUNCTION
Get the vertical beam position from the hardware.
INPUTS
none
RESULT
interrogates hardware for beam position and returns value.
valid results in are the range of 0-511.
Because of multitasking, the actual value returned may have
no use. If you are the highest priority task then the value
returned should be close, within 1 line.
BUGS
SEE ALSO
graphics.library/VideoControl graphics.library/VideoControl
NAME
VideoControl -- Modify the operation of a ViewPort's ColorMap (V36)
SYNOPSIS
error = VideoControl( cm , tags )
d0 a0 a1
ULONG VideoControl( struct ColorMap *, struct TagItem * );
FUNCTION
Process the commands in the VideoControl command TagItem buffer
using cm as the target, with respect to its "attached" ViewPort.
viewport commands:
VTAG_ATTACH_CM [_SET | _GET] -- set\get attached viewport
VTAG_VIEWPORTEXTRA [_SET | _GET] -- set\get attached vp_extra
VTAG_NORMAL_DISP [_SET | _GET] -- set\get DisplayInfoHandle
(natural mode)
VTAG_COERCE_DISP [_SET | _GET] -- set\get DisplayInfoHandle
(coerced mode)
genlock commands:
VTAG_BORDERBLANK [_SET | _CLR | _GET] -- on\off\inquire blanking
VTAG_BORDERNOTRANS [_SET | _CLR | _GET] -- on\off\inquire notransparency
VTAG_CHROMAKEY [_SET | _CLR | _GET] -- on\off\inquire chroma mode
VTAG_BITPLANEKEY [_SET | _CLR | _GET] -- on\off\inquire bitplane mode
VTAG_CHROMA_PEN [_SET | _CLR | _GET] -- set\clr\get chromakey pen #
VTAG_CHROMA_PLANE [_SET | | _GET] -- set\get bitplanekey plane #
copper commands
VTAG_USERCLIP [_SET | _CLR | _GET] -- on\off\inquire clipping of
UserCopperList at bottom
edge of ColorMap->cm_vp
(defaults to off)
buffer commands:
VTAG_NEXTBUF_CM -- link to more VTAG commands
VTAG_END_CM -- terminate command buffer
batch mode commands:
(if you want your videocontol taglist to be processed in "batch"
mode, that is, at the next MakeVPort() for the ColorMap->cm_vp;
you may intall a static list of videocontrol TagItems into the
ColorMap with the BATCH_ITEMS_SET command; and then enable/disable
batch mode processing of those items via the BATCH_CM control
command)
VTAG_BATCH_CM [_SET | _CLR | _GET] -- on\off\inquire batch mode
VTAG_BATCH_ITEMS [_SET | _ADD | _GET] -- set\add\get batched TagLists
private commands (used internally by intuition -- do not call):
VTAG_VPMODEID [_SET | _CLR | _GET] -- force GetVPModeID() return
INPUTS
cm = pointer to struct ColorMap obtained via GetColorMap().
tags = pointer to a table of videocontrol tagitems.
RESULT
error = NULL if no error occured in the control operation.
(non-NULL if bad colormap pointer, no tagitems or bad tag)
The operating characteristics of the ColorMap and its attached
ViewPort are modified. The result will be incorporated into the
ViewPort when its copper lists are reassembled via MakeVPort().
BUGS
SEE ALSO
graphics/videocontrol.h, GetColorMap(), FreeColorMap()
graphics.library/WaitBlit graphics.library/WaitBlit
NAME
WaitBlit -- Wait for the blitter to be finished before proceeding
with anything else.
SYNOPSIS
WaitBlit()
void WaitBlit( void );
FUNCTION
WaitBlit returns when the blitter is idle. This function should
normally only be used when dealing with the blitter in a
synchronous manner, such as when using OwnBlitter and DisownBlitter.
WaitBlit does not wait for all blits queued up using QBlit or
QBSBlit. You should call WaitBlit if you are just about to modify or
free some memory that the blitter may be using.
INPUTS
none
RESULT
Your program waits until the blitter is finished.
This routine does not use any the CPU registers.
do/d1/a0/a1 are preserved by this routine.
It may change the condition codes though.
BUGS
When examining bits with the CPU right after a blit, or when freeeing
temorary memory used by the blitter, a WaitBlit() may be required.
Note that many graphics calls fire up the blitter, and let it run.
The CPU does not need to wait for the blitter to finish before
returning.
Because of a bug in agnus (prior to all revisions of fat agnus)
this code may return too soon when the blitter has, in fact, not
started the blit yet, even though BltSize has been written.
This most often occurs in a heavily loaded systen with extended memory,
HIRES, and 4 bitplanes.
WaitBlit currently tries to avoid this agnus problem by testing
the BUSY bit multiple times to make sure the blitter has started.
If the blitter is BUSY at first check, this function busy waits.
This initial hardware bug was fixed as of the first "Fat Agnus" chip,
as used in all A500 and A2000 computers.
Because of a different bug in agnus (currently all revisions thru ECS)
this code may return too soon when the blitter has, in fact, not
stopped the blit yet, even though blitter busy has been cleared.
This most often occurs in a heavily loaded systen with extended memory,
in PRODUCTIVITY mode, and 2 bitplanes.
WaitBlit currently tries to avoid this agnus problem by testing
the BUSY bit multiple times to make sure the blitter has really
written its final word of desination data.
SEE ALSO
OwnBlitter() DisownBlitter() hardware/blit.h
graphics.library/WaitBOVP graphics.library/WaitBOVP
NAME
WaitBOVP -- Wait till vertical beam reached bottom of
this viewport.
SYNOPSIS
WaitBOVP( vp )
a0
void WaitBOVP( struct ViewPort * );
FUNCTION
Returns when the vertical beam has reached the bottom of this viewport
INPUTS
vp - pointer to ViewPort structure
RESULT
This function will return sometime after the beam gets beyond
the bottom of the viewport. Depending on the multitasking load
of the system, the actual beam position may be different than
what would be expected in a lightly loaded system.
BUGS
Horrors! This function currently busy waits waiting for the
beam to get to the right place. It should use the copper
interrupt to trigger and send signals like WaitTOF does.
SEE ALSO
WaitTOF() VBeamPos()
graphics.library/WaitTOF graphics.library/WaitTOF
NAME
WaitTOF -- Wait for the top of the next video frame.
SYNOPSIS
WaitTOF()
void WaitTOF( void );
FUNCTION
Wait for vertical blank to occur and all vertical blank
interrupt routines to complete before returning to caller.
INPUTS
none
RESULT
Places this task on the TOF wait queue. When the vertical blank
interupt comes around, the interrupt service routine will fire off
signals to all the tasks doing WaitTOF. The highest priority task
ready will get to run then.
BUGS
SEE ALSO
exec.library/Wait() exec.library/Signal()
graphics.library/WeighTAMatch graphics.library/WeighTAMatch
NAME
WeighTAMatch -- Get a measure of how well two fonts match. (V36)
SYNOPSIS
weight = WeighTAMatch(reqTextAttr, targetTextAttr, targetTags)
D0 A0 A1 A2
WORD WeighTAMatch(struct TTextAttr *, struct TextAttr *,
struct TagItem *);
FUNCTION
This function provides a metric to describe how well two fonts
match. This metric ranges from MAXFONTMATCHWEIGHT (perfect match)
through lower positive numbers to zero (unsuitable match).
INPUTS
reqTextAttr - the text attributes requested.
targetTextAttr - the text attributes of a potential match.
targetTags - tags describing the extended target attributes, or
zero if not available.
The [t]ta_Name fields of the [T]TextAttr structures are not used.
The tags affect the weight only when both a) the reqTextAttr
has the FSF_TAGGED bit set in ta_Style, and b) targetTags is
not zero. To fairly compare two different weights, the inclusion
or exclusion of tags in the weighing must be the same for both.
RESULTS
weight -- a positive weight describes suitable matches, in
increasing desirability. MAXFONTMATCHWEIGHT is a perfect
match. A zero weight is an unsuitable match.
SEE ALSO
OpenFont()
graphics.library/WritePixel graphics.library/WritePixel
NAME
WritePixel -- Change the pen num of one specific pixel in a
specified RastPort.
SYNOPSIS
error = WritePixel( rp, x, y)
d0 a1 D0 D1
LONG WritePixel( struct RastPort *, SHORT, SHORT );
FUNCTION
Changes the pen number of the selected pixel in the specified
RastPort to that currently specified by PenA, the primary
drawing pen. Obeys minterms in RastPort.
INPUTS
rp - a pointer to the RastPort structure
(x,y) - point within the RastPort at which the selected
pixel is located.
RESULT
error = 0 if pixel succesfully changed
= -1 if (x,y) is outside the RastPort
BUGS
SEE ALSO
ReadPixel() graphics/rastport.h
graphics.library/WritePixelArray8 graphics.library/WritePixelArray8
NAME
WritePixelArray8 -- write the pen number value of a rectangular array
of pixels starting at a specified x,y location and continuing
through to another x,y location within a certain RastPort. (V36)
SYNOPSIS
count = WritePixelArray8(rp,xstart,ystart,xstop,ystop,array,temprp)
D0 A0 D0:16 D1:16 D2:16 D3:16 A2 A1
LONG WritePixelArray8(struct RastPort *, UWORD, UWORD,
UWORD, UWORD, UBYTE *, struct RastPort *);
FUNCTION
For each pixel in a rectangular region, decode the pen number selector
from a linear array of pen numbers into the bit-planes used to describe
a particular rastport.
INPUTS
rp - pointer to a RastPort structure
(xstart,ystart) - starting point in the RastPort
(xstop,ystop) - stopping point in the RastPort
array - pointer to an array of UBYTEs from which to fetch the
pixel data. Allocate at least
((((width+15)>>4)<<4)*(ystop-ystart+1)) bytes.
temprp - temporary rastport (copy of rp with Layer set == NULL,
temporary memory allocated for
temprp->BitMap with Rows set == 1,
temprp->BytesPerRow == (((width+15)>>4)<<1),
and temporary memory allocated for
temprp->BitMap->Planes[])
RESULT
For each pixel in the array:
Pen - (0..255) number at that position is returned
NOTE
xstop must be >= xstart
ystop must be >= ystart
BUGS
SEE ALSO
WritePixel() graphics/rastport.h
graphics.library/WritePixelLine8 graphics.library/WritePixelLine8
NAME
WritePixelLine8 -- write the pen number value of a horizontal line
of pixels starting at a specified x,y location and continuing
right for count pixels. (V36)
SYNOPSIS
count = WritePixelLine8(rp,xstart,ystart,width,array,temprp)
D0 A0 D0:16 D1:16 D2 A2 A1
LONG WritePixelLine8(struct RastPort *, UWORD, UWORD,
UWORD, UBYTE *, struct RastPort *);
FUNCTION
For each pixel in a horizontal region, decode the pen number selector
from a linear array of pen numbers into the bit-planes used to describe
a particular rastport.
INPUTS
rp - pointer to a RastPort structure
(x,y) - a point in the RastPort
width - count of horizontal pixels to write
array - pointer to an array of UBYTEs from which to fetch the pixel data
allocate at least (((width+15)>>4)<<4) bytes.
temprp - temporary rastport (copy of rp with Layer set == NULL,
temporary memory allocated for
temprp->BitMap with Rows set == 1,
temprp->BytesPerRow == (((width+15)>>4)<<1),
and temporary memory allocated for
temprp->BitMap->Planes[])
RESULT
For each pixel in the array:
Pen - (0..255) number at that position is returned
NOTE
width must be non negative
BUGS
SEE ALSO
WritePixel() graphics/rastport.h
graphics.library/XorRectRegion graphics.library/XorRectRegion
NAME
XorRectRegion -- Perform 2d XOR operation of rectangle
with region, leaving result in region
SYNOPSIS
status = XorRectRegion(region,rectangle)
d0 a0 a1
BOOL XorRectRegion( struct Region *, struct Rectangle * );
FUNCTION
Add portions of rectangle to region if they are not in
the region.
Remove portions of rectangle from region if they are
in the region.
INPUTS
region - pointer to Region structure
rectangle - pointer to Rectangle structure
RESULTS
status - return TRUE if successful operation
return FALSE if ran out of memory
BUGS
SEE ALSO
OrRegionRegion() AndRegionRegion() graphics/regions.h
graphics.library/XorRegionRegion graphics.library/XorRegionRegion
NAME
XorRegionRegion -- Perform 2d XOR operation of one region
with second region, leaving result in second region
SYNOPSIS
status = XorRegionRegion(region1,region2)
d0 a0 a1
BOOL XorRegionRegion( struct Region *, struct Region * );
FUNCTION
Join the regions together. If any part of region1 overlaps
region2 then remove that from the new region.
INPUTS
region1 = pointer to Region structure
region2 = pointer to Region structure
RESULTS
status - return TRUE if successful operation
return FALSE if ran out of memory
BUGS