![[Contents]](../images/toc_d.gif)
![[Index]](../images/index_d.gif)
![[Help]](../images/help_d.gif)
![[Retrace]](../images/retrace_d.gif)
![[Browse <]](../images/prev.gif)
![[Browse >]](../images/next.gif)
NAME
CMD_WRITE -- Write ANSI text to the console display.
FUNCTION
Write a text record to the display. Interpret the ANSI
control characters in the data as described below. Note
that the RPort of the console window is in use while this
write command is pending.
IO REQUEST INPUT
io_Message mn_ReplyPort set if quick I/O is not possible
io_Device preset by the call to OpenDevice
io_Unit preset by the call to OpenDevice
io_Command CMD_WRITE
io_Flags IOF_QUICK if quick I/O possible, else zero
io_Length sizeof(*buffer), or -1 if io_Data is null
terminated
io_Data a pointer to a buffer containing the ANSI text
to write to the console device.
IO REQUEST RESULTS
io_Error the error result (no errors are reported as of V36)
io_Actual the number of bytes written from io_Data
io_Length zero
io_Data original io_Data plus io_Actual
ANSI CODES SUPPORTED
Codes are specified in the standard fashion for ANSI documents,
as the two 4 bit nibbles that comprise the character code,
high nibble first, separated by a slash. Thus 01/11 (ESC) is
a character with the hex value 1B (or the decimal value 27).
A character on the Amiga falls into one of the following four
ranges:
00/ 0-01/15 C0: ASCII control characters. See below.
02/ 0-07/15 G0: ASCII graphic characters. These characters
have an image that is displayed. Note that the
DEL character is displayed by the Console Device:
it is not treated as control character here.
08/ 0-09/15 C1: ANSI 3.41 control characters. See below.
10/ 0-15/15 G1: ECMA 94 Latin 1 graphic characters.
Independent Control Functions (no introducer) --
Code Name Definition
----- --- ----------------------------------------------
00/ 7 BEL BELL: actually an Intuition DisplayBeep()
00/ 8 BS BACKSPACE
00/ 9 HT HORIZONTAL TAB
00/10 LF LINE FEED
00/11 VT VERTICAL TAB
00/12 FF FORM FEED
00/13 CR CARRIAGE RETURN
00/14 SO SHIFT OUT: causes all subsequent G0 (ASCII)
characters to be shifted to G1 (ECMA 94/1)
characters.
00/15 SI SHIFT IN: cancels the effect of SHIFT OUT.
01/11 ESC ESCAPE
Code or Esc Name Definition
----- --- ---- ---------------------------------------------
08/ 4 D IND INDEX: move the active position down one line.
08/ 5 E NEL NEXT LINE
08/ 8 H HTS HORIZONTAL TABULATION SET
08/13 M RI REVERSE INDEX
09/11 [ CSI CONTROL SEQUENCE INTRODUCER: see next list
ISO Compatible Escape Sequences (introduced by Esc) --
Esc Name Definition
----- ---- ---------------------------------------------------
c RIS RESET TO INITIAL STATE: reset the console display.
Control Sequences, with the number of indicated parameters.
i.e. <CSI><parameters><control sequence letter(s)>. Note the
last entries consist of a space and a letter. CSI is either
9B or Esc[. A minus after the number of parameters (#p)
indicates less is valid. Parameters are separated by
semicolons, e.g. Esc[14;80H sets the cursor position to row
14, column 80.
CSI #p Name Definition
--- --- ---- -------------------------------------------------
@ 1- ICH INSERT CHARACTER
A 1- CUU CURSOR UP
B 1- CUD CURSOR DOWN
C 1- CUF CURSOR FORWARD
D 1- CUB CURSOR BACKWARD
E 1- CNL CURSOR NEXT LINE
F 1- CPL CURSOR PRECEDING LINE
H 2- CUP CURSOR POSITION
I 1- CHT CURSOR HORIZONTAL TABULATION
J 1- ED ERASE IN DISPLAY (only to end of display)
K 1- EL ERASE IN LINE (only to end of line)
L 1- IL INSERT LINE
M 1- DL DELETE LINE
P 1- DCH DELETE CHARACTER
R 2 CPR CURSOR POSITION REPORT (in Read stream only)
S 1- SU SCROLL UP
T 1- SD SCROLL DOWN
W n CTC CURSOR TABULATION CONTROL
Z 1- CBT CURSOR BACKWARD TABULATION
f 2- HVP HORIZONTAL AND VERTICAL POSITION
g 1- TBC TABULATION CLEAR
h n SM SET MODE: see modes below.
l n RM RESET MODE: see modes below.
m n SGR SELECT GRAPHIC RENDITION
n 1- DSR DEVICE STATUS REPORT
t 1- aSLPP SET PAGE LENGTH (private Amiga sequence)
u 1- aSLL SET LINE LENGTH (private Amiga sequence)
x 1- aSLO SET LEFT OFFSET (private Amiga sequence)
y 1- aSTO SET TOP OFFSET (private Amiga sequence)
{ n aSRE SET RAW EVENTS (private Amiga sequence)
| 8 aIER INPUT EVENT REPORT (private Amiga Read sequence)
} n aRRE RESET RAW EVENTS (private Amiga sequence)
~ 1 aSKR SPECIAL KEY REPORT (private Amiga Read sequence)
p 1- aSCR SET CURSOR RENDITION (private Amiga sequence)
q 0 aWSR WINDOW STATUS REQUEST (private Amiga sequence)
r 4 aWBR WINDOW BOUNDS REPORT (private Amiga Read sequence)
v 1 aRAV RIGHT AMIGA V PRESS (private Amiga Read sequence-V37)
Modes, set with <CSI><mode-list>h, and cleared with
<CSI><mode-list>l, where the mode-list is one or more of the
following parameters, separated by semicolons --
Mode Name Definition
------- ---- -------------------------------------------------
20 LNM LINEFEED NEWLINE MODE: if a linefeed is a newline
>1 ASM AUTO SCROLL MODE: if scroll at bottom of window
?7 AWM AUTO WRAP MODE: if wrap at right edge of window
NOTES
The console.device recognizes these SGR sequences.
Note that some of these are new to V36.
SGR (SELECT GRAPHICS RENDITION)
Selects colors, and other display characteristics
for text.
Syntax:
<ESC>[graphic-rendition...m
Example:
<ESC>[1;7m (sets bold, and reversed text)
Parameters:
0 - Normal colors, and attributes
1 - Set bold
2 - Set faint (secondary color)
3 - Set italic
4 - Set underscore
7 - Set reversed character/cell colors
8 - Set concealed mode.
22 - Set normal color, not bold (V36)
23 - Italic off (V36)
24 - Underscore off (V36)
27 - Reversed off (V36)
28 - Concealed off (V36)
30-37 - Set character color
39 - Reset to default character color
40-47 - Set character cell color
49 - Reset to default character cell color
>0-7 - Set background color (V36)
Used to set the background color before
any text is written. The numeric parameter
is prefixed by ">". This also means that if
you issue an SGR command with more than one
parameter, you must issue the digit only
parameters first, followed by any prefixed
parameters.
BUGS
Does not correctly display cursor in SuperBitMap layers for
versions prior to V36.
SEE ALSO
ROM Kernal Manual (Volume 1), exec/io.h