[Contents] [Index] [Help] [Retrace] [Browse <] [Browse >]

	IFND	RESOURCES_BATTMEMSHARED_I
RESOURCES_BATTMEMBITSSHARED_I	SET	1
**
**	$Filename: resources/battmembitsshared.i $
**	$Release: 2.04 Includes, V37.4 $
**	$Revision: 1.2 $
**	$Date: 90/05/29 $
**
**	BattMem shared specific bit definitions.
**
**	(C) Copyright 1989-1999 Amiga, Inc.
**		All Rights Reserved
**


*
* Shared bits in the battery-backedup ram.
*
*	Bits 64 and above
*

*
* SHARED_AMNESIA
*
*		The battery-backedup memory has had a memory loss.
*		This bit is used as a flag that the user should be
*		notified that all battery-backed bit have been
*		reset and that some attention is required. Zero
*		indicates that a memory loss has occured.
*

BATTMEM_SHARED_AMNESIA_ADDR	EQU	64
BATTMEM_SHARED_AMNESIA_LEN	EQU	1


*
* SCSI_HOST_ID
*
*		a 3 bit field (0-7) that is stored in complemented form
*		(this is so that default value of 0 really means 7)
*		It's used to set the A3000 controllers SCSI ID (on reset)
*

BATTMEM_SCSI_HOST_ID_ADDR	EQU	65
BATTMEM_SCSI_HOST_ID_LEN	EQU	3


*
* SCSI_SYNC_XFER
*
*		determines if the driver should initiate synchronous
*		transfer requests or leave it to the drive to send the
*		first request.  This supports drives that crash or
*		otherwise get confused when presented with a sync xfer
*		message.  Default=0=sync xfer not initiated.
*

BATTMEM_SCSI_SYNC_XFER_ADDR	EQU	68
BATTMEM_SCSI_SYNC_XFER_LEN	EQU	1


	ENDC	; RESOURCES_BATTMEMSHARED_I